How to Calculate Board Feet

Why does an 8 foot 2 x 4 count as 5.33 board feet on paper but hold only 3.50 board feet of real wood? The gap comes from how lumber is named and sold. This guide shows the formula, the hardwood quarter system, and the size trap that trips up new buyers.

Quick Answer

To calculate board feet, multiply thickness in inches by width in inches by length in inches, then divide by 144. If length is in feet, divide by 12 instead. One board foot is a piece 1 ft long, 1 ft wide and 1 inch thick, or 144 cubic inches. Multiply by the number of boards.

One Board Foot Is a Volume, Not a Length

A board foot is a unit of volume for lumber. One board foot is a board 1 foot long, 1 foot wide and 1 inch thick. That equals 144 cubic inches, or one twelfth of a cubic foot. Think of it as the amount of wood in a board, not how big the board looks on the rack.

Only the volume matters, not the shape. A 12 x 12 x 1 inch slab and a 12 x 6 x 2 inch block both hold 144 cubic inches, so each one is a single board foot.

In metric, one board foot is exactly 2.359737216 liters, or about 2,360 cubic centimeters. Hardwood is sold this way, while retailers generally do not sell softwood by the board foot, according to Wikipedia.

Two shapes, one board foot On the left is a wide, thin slab measuring 12 inches by 12 inches by 1 inch. On the right is a narrower, thicker block measuring 12 inches by 6 inches by 2 inches. Both hold 144 cubic inches, so each equals one board foot. Different shapes, same volume: 1 board foot 12 x 12 x 1 in 12 x 6 x 2 in 144 cubic inches 144 cubic inches Shapes are schematic, not to scale in depth.
A thin slab and a thick block can hold the same amount of wood.

The Formula in Inches or in Feet

Board feet equal thickness times width times length, divided by 144, when all three are in inches. If you measure length in feet, divide by 12 instead. The 12 appears because 144 divided by 12 inches per foot is 12.

Pick one version for each board and stay with it. Mixing feet and inches in the same product is the classic slip. Cubic feet are simply board feet divided by 12.

The table runs four boards through the formula. A board 2 x 4 x 10 ft comes to 6.67 board feet, which matches a Penn State lesson example. You can check any size fast with the board foot calculator.

Board foot math for four example orders
Order Math Board feet
One 1 x 6 x 96 in board (8 ft) 1 x 6 x 96 / 144 = 576 / 144 4.00
One 2 x 6 x 96 in board (8 ft) 2 x 6 x 96 / 144 = 1,152 / 144 8.00
One 2 x 4 x 10 ft board 2 x 4 x 10 / 12 6.67
Ten 1 x 6 x 8 ft boards 10 x 4.00 40.00

Reading Hardwood Quarters: 4/4, 5/4 and 8/4

Hardwood thickness is quoted in quarters of an inch. A 4/4 board, read as four quarter, is 1 inch thick. A 5/4 board is 1.25 inches, and an 8/4 board is 2 inches.

Double the thickness and you double the board feet. A board that is 8/4 x 6 in x 8 ft equals 2 x 6 x 96 / 144, or 8 board feet. That is twice the 4 board feet of a 4/4 board with the same width and length.

Rough lumber is measured before drying and planing, so it carries its full sawn size. A nominal 1 inch board surfaced on two sides measures 13/16 inch, yet you are still priced on the rough 1 inch. Type the rough thickness the seller quotes, because the calculator multiplies exactly what you enter.

Thickness doubles the board feet Two rows of four steps each. Top row: a 4/4 board that is 1 inch thick, multiplied out as 1 x 6 x 96 equals 576, divided by 144, gives 4 board feet. Bottom row: an 8/4 board that is 2 inches thick, multiplied out as 2 x 6 x 96 equals 1,152, divided by 144, gives 8 board feet. Same width and length, twice the thickness, twice the wood 4/4 x 6 x 96 in 1 in thick 1 x 6 x 96 = 576 576 / 144 divide 4 board feet 8/4 x 6 x 96 in 2 in thick 2 x 6 x 96 = 1,152 1,152 / 144 divide 8 board feet Length is in inches here, so the divisor is 144.
Going from 4/4 to 8/4 doubles the board feet of the same board.

Nominal Size vs Actual Size: The 2 x 4 Trap

A 2 x 4 is named for its rough size, but the stud you carry home is smaller. Planed softwood is priced by nominal size, yet its dressed size is minimally 1 1/2 by 3 1/2 inches. Wikipedia lists the usual cuts: about 1/4 inch off under 2 inches, 1/2 inch for 2 to 8 inches, and 3/4 inch above 8.

For an 8 foot 2 x 4, the nominal math gives 2 x 4 x 96 / 144, or 5.33 board feet. The real piece is 1.5 x 3.5 x 96 / 144, or 3.50 board feet. Roughly two thirds of the nominal volume is actual wood.

This is why softwood studs are sold by the piece. If you are framing, our guide on how many studs for a wall counts the pieces for you.

Nominal vs actual board feet of an 8 ft 2 x 4 Two horizontal bars drawn to the same scale. The nominal 2 x 4 by 96 inches bar is 5.33 board feet and is longer. The dressed 1.5 x 3.5 by 96 inches bar is 3.50 board feet and is about two thirds as long. An 8 ft 2 x 4: what the name says vs what you get Nominal size 2 x 4 x 96 in 5.33 board feet Dressed size 1.5 x 3.5 x 96 in 3.50 board feet Both bars use the same scale, so the length difference is real.
The dressed 2 x 4 holds about two thirds of its nominal board feet.
Three ways to size the same 8 ft piece
Basis Thickness x width Board feet Where it applies
Nominal softwood 2 x 4 in 5.33 The name on the label
Dressed softwood 1.5 x 3.5 in 3.50 The wood you can measure
Rough 8/4 hardwood 2 x 4 in 5.33 Priced on its full sawn size

Pricing a Hardwood Order Step by Step

Here is a full order by hand. You need five boards listed as 4/4 x 8 in x 6 ft. The price is an example price of $9 per board foot, not a quote.

  1. Convert the thickness. A 4/4 board is 1 inch thick, so the size is 1 x 8 inches by 72 inches.
  2. Find one board. Multiply 1 x 8 x 72 to get 576, then divide by 144. Each board is 4 board feet.
  3. Multiply by quantity. Five boards at 4 board feet each total 20 board feet.
  4. Apply the price. Twenty board feet at $9 per board foot comes to $180.

That total covers only the wood you buy, not the wood you lose in cutting. Add your own allowance for defects and cuts, and see saw kerf explained for the blade side. The lumber cost calculator can then total a bigger project.

Metric buyers can convert too. Four board feet is 4 / 12, or 0.3333 cubic feet, which is about 9.44 liters or 0.00944 cubic meters.

Mistakes That Throw Off Your Count

Most errors come from a few habits. Each one is easy to fix once you spot it, and the list below covers the common ones.

  • Using finished thickness. Yards price rough lumber on its rough size, so enter the thickness the seller quotes.
  • Mixing units. Use inches with 144 or feet with 12, never both in one calculation.
  • Forgetting the quantity. The formula gives one board. Multiply by how many you need.
  • Trusting nominal stud math. A 2 x 4 stud is not 5.33 board feet of real wood.
  • Skipping an allowance. Defects and cuts waste some wood, so add your own margin.

Remember that yards may round, grade and price by their own rules. Ask how they round before you place an order. If you also need to haul the load, wood weight by species explained covers weight.

Ready to check your own sizes?

Enter thickness, width, length and quantity in the board foot calculator and compare it with your hand math.

FAQs About Board Feet

How many board feet are in a 2 x 4 x 8?

By nominal size it is 5.33 board feet. By the dressed size of 1.5 x 3.5 inches it is 3.50 board feet. Retailers usually sell studs by the piece, not by the board foot.

What does 4/4 mean on a hardwood board?

It is read as four quarter and means the board is 1 inch thick. In the same way, 5/4 is 1.25 inches and 8/4 is 2 inches.

How do I convert board feet to cubic feet?

Divide board feet by 12. One board foot is one twelfth of a cubic foot, or 144 cubic inches. For example, 4 board feet is 0.3333 cubic feet.

Should I use rough or finished thickness?

Use the rough thickness the seller quotes. Rough lumber is priced on its full sawn size, so a 1 inch board that planes to 13/16 inch is still priced as 1 inch.

When do I divide by 12 instead of 144?

Divide by 12 when the length is in feet, and by 144 when the length is in inches. Thickness and width stay in inches either way. Use one version per board.

How many liters are in one board foot?

One board foot is exactly 2.359737216 liters, or about 2,360 cubic centimeters. So 4 board feet is about 9.44 liters.

Do lumber yards figure board feet the same way?

The basic formula is the same, but yards may round, grade and price by their own rules. Confirm the size, grade and rounding with your seller before you buy.

Sources and Further Reading

References Used in This Article

This article is general education. Lumber yards may round, grade and price by their own rules, so confirm before you buy. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-10-14.


Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.