Your hydrometer read 1.050 on brew day and 1.010 two weeks later, so how strong is the beer? The answer takes one subtraction and one multiplication, and you can do it on a napkin.
To calculate ABV from gravity, subtract your final gravity (FG) from your original gravity (OG), then multiply by 131.25. For example, 1.050 minus 1.010 is 0.040, and 0.040 times 131.25 gives 5.25 percent ABV. The formula is a shortcut that fits typical beer well and drifts a little on strong brews.
Why Two Gravity Readings Reveal the Alcohol
Yeast eats sugar and makes alcohol, so the liquid gets thinner as fermentation runs. A hydrometer measures that change as a density reading called gravity. The size of the drop tells you how much alcohol formed.
Original gravity (OG) is the specific gravity you measure before fermentation. Final gravity (FG) is the reading at the completion of fermentation. A typical strength beer might start near 1.050 and finish near 1.010. Water reads 1.000, so every point above that is dissolved material.
A hydrometer floats in your sample, and you read the gravity off its stem. ABV, or alcohol by volume, is the volume the ethanol would fill if separated out, divided by the total volume, both at 20 C. Brewers use a hydrometer whose stem is bathed in air, which gives an apparent gravity. If specific gravity is new to you, our density calculator shows how density works.
The ABV Formula in Four Steps
The core formula is ABV = (OG minus FG) × 131.25. Here is the hand method with the readings from above.
- Write OG as a full number. Enter 1.050, not 50.
- Write FG the same way. Here it is 1.010.
- Subtract FG from OG. 1.050 minus 1.010 leaves a drop of 0.040.
- Multiply the drop by 131.25. 0.040 × 131.25 equals 5.25 percent ABV.
The 131.25 factor is a shortcut that turns a density drop into a volume percentage. It works because the same drop always means about the same amount of alcohol in a typical beer. Our ABV calculator runs the same math, so use it to check your own arithmetic.
What Attenuation Tells You
Apparent attenuation shows how much of the starting sugar signal your yeast removed. The formula is (OG minus FG) divided by (OG minus 1), times 100. Wikipedia calls this the apparent degree of fermentation.
Think in gravity points. An OG of 1.050 is 50 points above water, and the yeast removed 40 of them. So 0.040 divided by 0.050 gives 80 percent attenuation.
Notice that attenuation needs the full gravity numbers too. If you drop the 1.0 from OG, the subtraction in the denominator breaks. A higher attenuation means the yeast finished more of its work, and a lower one means more sweetness stays behind.
A cider that starts at 1.048 and finishes at 1.000 reaches 100 percent. That means all the fermentable sugar is gone.
ABW, Proof, and Standard Drinks From the Same Numbers
ABW is alcohol by weight. This method estimates it as ABV × 0.79, so 5.25 × 0.79 is 4.15 percent. Wikipedia notes ABW is about four fifths of ABV at low strengths, and the factor is not constant, so 0.79 is an approximation.
US proof is twice the ABV, so 5.25 percent ABV is 10.5 proof. For a US standard drink, the NIAAA uses 0.6 fluid ounces, or 14 grams, of pure alcohol. At 5 percent, 12 fluid ounces holds exactly 0.6 fluid ounces.
For our beer, 12 × 0.0525 divided by 0.6 gives 1.05 standard drinks per 12 ounces. Our standard drink guide explains that unit in full.
These conversions help when you compare a homebrew with a store label that uses another unit. They are unit math only. A stronger drink can hold more than one standard drink in a single serving, because ABV varies within and across beverage types.
Three Worked Examples You Can Check
These are the three presets on the calculator. Every row follows the same steps, so you can verify each one by hand.
| Brew | OG to FG | Drop | ABV | Attenuation | Drinks per 12 oz |
|---|---|---|---|---|---|
| Standard ale | 1.050 to 1.010 | 0.040 | 5.25% | 80% | 1.05 |
| Strong IPA | 1.065 to 1.012 | 0.053 | 6.96% | 81.5% | 1.39 |
| Dry cider | 1.048 to 1.000 | 0.048 | 6.30% | 100% | 1.26 |
Check the IPA by hand. The drop is 1.065 minus 1.012, or 0.053. Then 0.053 × 131.25 is 6.95625, which rounds to 6.96 percent. Attenuation is 0.053 divided by 0.065, or 81.5 percent.
Check the cider the same way. The drop is 0.048, and 0.048 × 131.25 is exactly 6.30 percent. Because FG is 1.000, attenuation reaches 100 percent.
Treat these ranges as typical, not as targets. Light beer runs about 3.5 to 4.5 percent, standard beer 4.5 to 6, and strong beer or IPA 6 to 9. Wine and mead run about 11 to 15 percent, and cider about 4 percent when sweet to 8 or more when dry.
How Accurate Is the 131.25 Shortcut?
It is a shortcut, not a law of nature. For the 1.050 and 1.010 beer, other published formulas give 5.23 to 5.31 percent. All sit within about 0.1 point of the 5.25 you get here.
Strong brews show a larger gap. At OG 1.100 and FG 1.020, 131.25 × 0.080 gives 10.50 percent. The formula Wikipedia lists for stronger beer, (105 / 0.79) × (drop / FG), gives 132.911 × 0.078431, or 10.42. That is about 0.08 apart, so strong brews and labels can need a better formula.
For everyday homebrew, the shortcut is fine. Use it to compare batches, track your own recipes, and sanity-check a label. When a result must be precise, pick the fuller formula and note which one you used. That keeps your records honest from batch to batch.
Reading Mistakes That Skew Your ABV
Most errors come from the reading, not the math. Check these before you trust a number.
- Swapping OG and FG. The drop must be positive, so the larger number goes first.
- Typing 50 instead of 1.050. Enter the full gravity.
- Confusing ABV with ABW. Labels use ABV, so do not compare them with ABW.
- Reading a hot sample. A warm sample reads low, and the calculator does not correct for sample temperature. The current ASBC table uses 20 C, and some hydrometers are set for 16 C (60 F).
- Measuring too early. An early final gravity understates ABV, so wait for stable readings before you bottle. Our priming sugar guide covers the next step.
- Using a refractometer for the final reading. Alcohol throws it off, so convert the value before you enter it.
Take your readings the same way each time, and write down the date and sample temperature. A clear note beside each gravity makes it easy to see later which reading was off.
Type your OG and FG into the ABV calculator to see ABV, ABW, attenuation, and standard drinks at once.
FAQs About ABV and Gravity Readings
What is the formula to calculate ABV from gravity?
Subtract final gravity from original gravity, then multiply by 131.25. For 1.050 and 1.010, that is 0.040 times 131.25, which equals 5.25 percent ABV.
What is original gravity?
Original gravity is the specific gravity you measure before fermentation starts. A typical strength beer might read about 1.050 at that point.
Can I calculate ABV with only one reading?
No. You need both readings because the alcohol comes from the drop between them. A single reading only tells you how dense the liquid is.
Why do other formulas give a different ABV?
The 131.25 factor is a shortcut. Other published constants give 5.23 to 5.31 percent for a 1.050 to 1.010 beer, all within about 0.1 point.
What is the difference between ABV and ABW?
ABV is alcohol as a share of volume, and ABW is a share of weight. At low strengths ABW is about four fifths of ABV, so this method multiplies by 0.79.
Does temperature change my hydrometer reading?
Yes. A warm sample reads low. Cool the sample to the temperature your hydrometer is calibrated for, since the calculator does not correct for sample temperature.
Can I use a refractometer for the final gravity?
Not directly. Alcohol throws off refractometer final readings, so convert the value to a true gravity before you enter it.
Sources and Further Reading
References Used in This Article
- Wikipedia, Alcohol by volume, accessed 2026-10-14.
- Wikipedia, Gravity (alcoholic beverage), accessed 2026-10-14.
- National Institute on Alcohol Abuse and Alcoholism, What Is A Standard Drink?, accessed 2026-10-14.
This article explains the math and units, not how much anyone should drink. If you drink, follow the guidance of your local health authority. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-10-14.
Author
Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.




