Metric Converter

Quick answer

A metric converter changes a value from one SI prefix to another, such as kilometers to meters. Subtract the target prefix exponent from the starting one and move the decimal point that many places. Kilo is 10^3, so 5 km is 5,000 m. For square units the shift doubles, and for cubic units it triples.

Updated 2026-09-28Reviewed by Prof. Dr. Khalil Mudassar, PhD
Try
Any SI prefix to any prefix
Mass prefixes attach to the gram, so pick kilo for kilograms. Area and cubic volume square or cube the prefix.
The prefix of the value you have, for example kilo for km.
The prefix you want. Pick no prefix for the base unit (m, g, L, W).
Any number. E-notation such as 3e-9 works for very large or small values.

Result

--
Exact factor--
Reverse direction--
Decimal point shift--
Scientific notation--
Base unit and special names (t, ha, L, mL)--

Calculations run in your browser. Inputs are not sent to our servers; anything you Save stays in this browser only.

Saved results (0)

How to Use the Metric Converter

  1. Pick the quantity. It sets the base unit: meter, gram, liter, square meter, cubic meter, watt, joule, hertz, pascal or second.
  2. Choose the From prefix you have and the To prefix you want. All 24 SI prefixes are listed, from quetta (10^30) down to quecto (10^-30).
  3. Type the value. The result updates as you type, with the factor, the reverse factor and the decimal shift.
ResultWhat it means
ResultYour value in the target unit. The decimal point of the number you typed is moved, so no digit is rounded.
Exact factorHow many target units make one starting unit, as a power of ten.
Reverse directionThe same relation read the other way.
Decimal point shiftHow many places the point moves, and which way. This is the mental-math shortcut.
Scientific notationThe result as a power of ten, useful for very large or very small values.
Base unit and special namesThe value in the base unit, plus tonnes for mass, hectares for area and liters or milliliters for volume.

What Is a Metric Converter?

A metric converter moves a measurement between units of the same metric family, such as millimeters and kilometers or milligrams and kilograms. It does not change the quantity, only the prefix that scales the unit.

The metric system, formally the International System of Units (SI), builds every multiple and fraction from one base unit plus a prefix. The BIPM, which maintains the SI, lists 24 prefixes. The newest four, ronna, quetta, ronto and quecto, were added in 2022.

Because each prefix is an exact power of ten, a metric conversion never needs a rounded factor. That is the difference from metric to imperial work, where factors such as 25.4 mm per inch or 0.45359237 kg per pound come in. For those, use the metric to imperial converter or the imperial to metric converter.

This tool covers the same four families as our earlier version (length, mass, volume and area) and adds cubic meters, power, energy, frequency, pressure and time, plus a prefix-only mode for any other SI unit.

How Does Metric Prefix Conversion Work?

You subtract exponents: the power of ten of the starting prefix minus that of the target prefix tells you how far to move the decimal point.

Formula: result = value x 10^((p_from - p_to) x k) where k = 1 for plain units, 2 for square units and 3 for cubic units
  1. Look up each exponent: kilo is 3, no prefix is 0, centi is -2, milli is -3, micro is -6.
  2. Subtract: km to cm is 3 - (-2) = 5. For cm^2 to m^2 it is (-2 - 0) x 2 = -4.
  3. Move the decimal point: right for a positive result, left for a negative one. 1.2 km = 120,000 cm, and 350 cm^2 = 0.035 m^2.

The k factor comes from NIST SP 330: a prefix and its unit form one inseparable symbol, and a power applies to the whole symbol. So 2.3 cm^3 = 2.3 x (10^-2 m)^3 = 2.3 x 10^-6 m^3.

Metric Conversion Worked Examples

Length. 5 km to meters: 3 - 0 = 3, so move the point 3 places right. 5,000 m.

Volume in liters. 750 mL to liters: -3 - 0 = -3, so move 3 places left. 0.75 L.

Mass. 2,500 mg to grams gives 2.5 g. Mass prefixes attach to the gram, so a kilogram is simply kilo plus gram.

Area. 0.25 km^2 to square meters: (3 - 0) x 2 = 6. 250,000 m^2, which is 25 hectares. The square meters to square feet converter takes that figure into US units.

Cubic volume. 2.3 cm^3 to cubic meters: (-2 - 0) x 3 = -6. 0.0000023 m^3, the example NIST uses.

Power. 5 kW to milliwatts: 3 - (-3) = 6. 5,000,000 mW.

Factors That Change Your Result

The powers of ten are fixed. These five rules decide whether you apply them correctly.

Squared and Cubed Units

1 km = 1,000 m, but 1 km^2 = 1,000,000 m^2 and 1 km^3 = 10^9 m^3. Pick the area or cubic category so the tool doubles or triples the shift.

Letter Case

M is mega (10^6) and m is milli (10^-3). P is peta and p is pico. NIST notes that multiple prefixes use uppercase symbols except kilo (k), hecto (h) and deka (da).

The Kilogram Exception

The kilogram is the only SI base unit with a prefix in its name. NIST SP 330 says mass prefixes go on the gram: 10^-6 kg is a milligram, not a microkilogram.

No Stacked Prefixes

SP 330 does not permit compound prefixes. A millimicrometer is not a unit; the correct name is nanometer.

Binary Prefixes for Data

SI prefixes mean powers of 10 only. SP 330 notes that one kilobit is 1,000 bits, and recommends kibi (Ki) for 2^10 = 1,024. The kilowatts to watts converter is a plain decimal case.

Metric Converter vs Metric to Imperial Converter

A metric converter only moves between prefixes of one SI unit, so every factor is an exact power of ten. A metric to imperial converter crosses into feet, pounds or gallons, where factors are defined decimals.

QuestionMetric converter (this page)Metric to imperial
Examplekm to m, mg to g, mL to Lkm to miles, kg to lb, L to gallons
Type of factorAlways 10^nDefined decimals such as 0.3048 m per foot
Rounding neededNever for the factorOften, for the final value
Mental mathMove the decimal pointMultiply or divide

Special names sit inside the metric system too: a tonne is a megagram, a hectare is a square hectometer, and a liter is a cubic decimeter. For the tonne in kilograms, see the megagram to kilogram converter.

When to Use a Metric Converter

Schoolwork and Science Labs

Lab data often mixes mL, L, mg and g. Converting everything to one prefix before you calculate avoids errors of a factor of 1,000.

Engineering and Electronics

Datasheets jump between nF and pF, kW and MW, kPa and MPa. The prefix-only mode handles farads, ohms or any other SI unit.

Land, Buildings and Containers

Plans may list mm, site maps m^2 or ha, and tanks m^3 or L. The area and cubic categories keep the squared and cubed rules straight.

SI Prefixes Table: Quetta to Quecto

All 24 SI prefixes as listed by the BIPM, with the year NIST gives for each group. The number names use the US short scale, as on the NIST prefix page.

PrefixSymbolFactorDecimalNameAdopted
quettaQ10^301 followed by 30 zerosnonillion2022
ronnaR10^271 followed by 27 zerosoctillion2022
yottaY10^241 followed by 24 zerosseptillion1991
zettaZ10^211 followed by 21 zerossextillion1991
exaE10^181 followed by 18 zerosquintillion1975
petaP10^151 followed by 15 zerosquadrillion1975
teraT10^121,000,000,000,000trillion1960
gigaG10^91,000,000,000billion1960
megaM10^61,000,000million1960
kilok10^31,000thousand1795
hectoh10^2100hundred1795
deca (deka)da10^110ten1795
no prefix (base unit)-10^01one-
decid10^-10.1tenth1795
centic10^-20.01hundredth1795
millim10^-30.001thousandth1795
micromu10^-60.000001millionth1960
nanon10^-90.000000001billionth1960
picop10^-120.000000000001trillionth1960
femtof10^-1514 zeros after the point, then 1quadrillionth1964
attoa10^-1817 zeros after the point, then 1quintillionth1964
zeptoz10^-2120 zeros after the point, then 1sextillionth1991
yoctoy10^-2423 zeros after the point, then 1septillionth1991
rontor10^-2726 zeros after the point, then 1octillionth2022
quectoq10^-3029 zeros after the point, then 1nonillionth2022

The micro symbol is the Greek letter mu. Deca is the BIPM spelling and deka the NIST spelling of the same prefix.

Common Metric Conversion Mistakes

1. Using the Length Factor for Area

Converting 3 m^2 to cm^2 by multiplying by 100 gives 300. The right answer is 30,000, because the prefix is squared.

2. Moving the Point the Wrong Way

Going to a smaller unit makes the number bigger. 2 m is 2,000 mm, not 0.002 mm.

3. Mixing Up M and M

5 Mm is 5,000 km. 5 mm is five thousandths of a meter. The difference is 10^9.

4. Treating the Liter as a Cubic Meter

1 L is 1 dm^3, which is 0.001 m^3. NIST lists 1,000 L = 1 m^3.

5. Adding a Prefix to Kg

A thousand kilograms is a megagram (Mg) or tonne, not a kilokilogram.

6. Reading a Gigabyte as 2^30 Bytes

Under SI rules giga means 10^9. The binary unit is the gibibyte (GiB).

Accuracy and Limitations

Every metric prefix conversion is exact, so the only uncertainty is in the value you enter.

What it calculates accurately

  • Any of the 24 SI prefixes to any other, plus the base unit
  • Square and cubic units with the doubled or tripled shift
  • Tonnes, hectares, liters and milliliters as special names
  • Every typed digit, with no floating point noise

What it does not account for

  • Imperial or US customary units (use the linked converters)
  • Temperature scales, which need an offset, not a prefix
  • Binary data prefixes such as KiB and MiB
  • Converting between different quantities, such as liters to grams

How We Convert Metric Units

Method
result = value x 10^((p_from - p_to) x k), with k = 1, 2 or 3 for plain, square or cubic units.
Inputs used
Quantity (base unit), from prefix, to prefix and one value.
Assumptions
The 24 SI prefixes of the BIPM table. Mass prefixes on the gram. 1 L = 1 dm^3, 1 mL = 1 cm^3, 1 ha = 1 hm^2, 1 t = 1 Mg.
Verdict band
Green for an exact conversion. Blue when both prefixes are the same. Amber for jumps of 18 or more powers of ten, which often signal a case error.
Rounding
None. The decimal point of the typed number is shifted. Scientific notation above 24 integer digits or 18 decimals.
Edge cases
Negative values are blocked for length, mass, area and volume, and allowed for other units. Zero returns zero. Empty input clears the results.
Sources
BIPM SI prefixes, NIST SP 330 Section 3, NIST metric prefixes, NIST SI units of volume and NIST Handbook 44 Appendix C (listed under Sources below).
Last reviewed
2026-09-30.

Frequently Asked Questions About Metric Conversions

How many SI prefixes are there?

There are 24. The four newest, ronna, quetta, ronto and quecto, were added in 2022.

How do I convert km to cm?

Move the decimal point 5 places right, because kilo is 10^3 and centi is 10^-2. So 1.2 km is 120,000 cm.

How many square centimeters are in a square meter?

There are 10,000 cm^2 in 1 m^2, because (10^2)^2 = 10^4.

How many liters are in a cubic meter?

There are exactly 1,000 liters in 1 m^3, since 1 L is 1 dm^3.

Is a milliliter the same as a cubic centimeter?

Yes. NIST lists 1 cm^3 = 1 mL, so the two are equal.

How many hectares are in a square kilometer?

There are 100 hectares in 1 km^2. A hectare is 10,000 m^2 and a square kilometer is 1,000,000 m^2.

Why is the kilogram written as kilo plus gram?

The SI forms mass prefixes on the gram. The kilogram is the base unit, but its name already includes the prefix kilo.

What is the largest SI prefix?

Quetta (Q), equal to 10^30. The smallest is quecto (q), equal to 10^-30.

Can I use this for metric to imperial conversions?

No. This page stays inside the metric system. Use the metric to imperial converter for feet, pounds or gallons.

Is my data saved or sent anywhere?

No. The converter runs in your browser and nothing goes to our servers. Saved results stay in this browser only.

Sources

Related Calculators

Need a conversion outside the metric system?

Explore all converters

This converter is for general education and everyday use. Every metric prefix conversion here is an exact power of ten. For trade, lab or engineering records, follow the units and rounding that your standard, contract or instrument requires. Spotted an error? Let us know.

Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.