How Much Laminate Flooring Do You Need?

How many boxes of laminate does a 12 by 10 foot room take? In our example the answer is 10. You can find it in five short steps, and the hard part is knowing where to round up.

Quick Answer

To estimate laminate flooring, multiply room length by width, divide by the area of one plank, add 10 percent for waste, then round up to whole planks and whole boxes. A 12 by 10 foot room with 48 by 5 inch planks needs 80 planks, or 10 boxes of 8.

The Plank Math, Step by Step

You need five numbers: room length, room width, plank length, plank width, and a waste allowance. Everything else follows from them, so measure carefully before you shop. Here is the full run for a 12 by 10 foot room, the same example the laminate flooring calculator loads by default.

  1. Find the room area. Multiply length by width: 12 x 10 = 120 sq ft. Count closets and alcoves too. For odd shapes, the square footage calculator helps.
  2. Find one plank’s area. Multiply plank length by width in inches, then divide by 144. For a 48 x 5 inch plank, 240 / 144 = 1.6667 sq ft.
  3. Divide room by plank. 120 / 1.6667 = 72 planks.
  4. Add waste. 72 x 1.10 = 79.2, which rounds up to 80 planks.
  5. Convert to boxes. At 8 planks per box, 80 / 8 = 10 boxes exactly. Your box label gives the real count.
From room size to boxes of laminate Four boxes joined by arrows. First, room area 12 times 10 equals 120 square feet. Second, 120 divided by 1.6667 square feet per plank equals 72 planks. Third, add 10 percent waste: 72 times 1.10 is 79.2, rounded up to 80 planks. Fourth, 80 planks divided by 8 per box equals 10 boxes. From room size to boxes Room area 12 × 10 120 sq ft Planks to cover 120 ÷ 1.6667 72 planks Add 10% waste 72 × 1.10 = 79.2 80 planks Planks per box 80 ÷ 8 10 boxes Example: 48 × 5 inch planks, so one plank covers 240 ÷ 144 = 1.6667 sq ft.
Each step feeds the next, and the last two steps round up.

How Much Waste to Add

Add 10 percent for a standard layout and 15 percent for a diagonal one. Those are the figures in the Pergo installation guide we checked. Your own manufacturer may give different numbers, so read the guide in your box.

Waste covers end cuts, odd-shaped corners, and the plank you cut wrong. It is a planning cushion, not a promise. Rooms with many corners or doorways may eat more than a plain rectangle does.

A diagonal layout usually leaves more scrap, because rows start and end with angled cuts. That is the likely reason the guide asks for a bigger allowance. Treat the 15 percent as a starting point.

Here is the same 12 by 10 room laid on the diagonal. 72 x 1.15 = 82.8, which rounds up to 83 planks. Then 83 / 8 = 10.375, so you buy 11 boxes. The chart shows how the count grows.

Plank count with no waste, 10 percent, and 15 percent A bar chart drawn to scale from zero for a 12 by 10 foot room with 48 by 5 inch planks. The first bar is 72 planks with no waste. The second bar is 80 planks with 10 percent waste. The third bar is 83 planks with 15 percent diagonal waste. Waste changes the plank count 72 planks, no waste 80 planks, 10% waste 83 planks, 15% diagonal Bars are drawn to scale from zero. Room: 12 × 10 ft, 48 × 5 inch planks.
Going from 10 to 15 percent adds three planks here, but it adds a whole box.

Why You Buy Whole Boxes

Boxes come in whole counts, so you round up twice. First round up the plank count after adding waste. Then round up the box count. Never round down, or you will run short on the last row. A second trip to the store is a hassle.

Take a bigger room: 15 x 14 feet with 48 x 7 inch planks. The area is 210 sq ft. One plank is 336 / 144 = 2.3333 sq ft, so 210 / 2.3333 = 90 planks. With 10 percent waste that is 99 planks, and 99 / 8 = 12.375, so you buy 13 boxes.

Three rooms, same 8 planks per box (an example count, not a standard)
Layout Plank size Waste Planks needed Boxes Spare planks
12 x 10 ft, straight 48 x 5 in 10% 80 10 0
12 x 10 ft, diagonal 48 x 5 in 15% 83 11 5
15 x 14 ft, straight 48 x 7 in 10% 99 13 5

Spare planks come from rounding up. They give you a small extra cushion for a bad cut.

Underlayment and Transition Strips

Underlayment is the thin layer under a floating floor, and you buy it by area. Our calculator uses the room area times 1.10 as a planning allowance for overlap and trimming. For 120 sq ft, that is 132 sq ft.

Whether you need a separate layer depends on the plank. The Pergo guide says foam underlayment is needed when the planks have no attached underlayment. Over concrete, it calls for a 6-mil polyethylene film with seams overlapped 8 inches.

Keep the underlayment area separate from the plank count. Planks are counted in whole pieces, while underlayment is counted in square feet. Mixing the two is an easy way to order the wrong amount.

Transition strips cover the joint where laminate meets another floor. The calculator counts one strip per doorway, which is a planning default. The same guide says doorways under 4 feet wide always need a T-molding or another transition.

If you are weighing laminate against click-together vinyl, the vinyl flooring calculator lets you run that product beside this one.

The Expansion Gap and Acclimation Time

Laminate floats over the subfloor. It is not nailed or glued down, so it needs room to move. Leave a gap around the walls and fixed objects, and cover it with trim. Our baseboard calculator counts the trim for you.

Where the gap, the planks, and the doorway strip go A simple top view of a rectangular room, not to scale. A band around the edge marks the expansion gap along every wall. The inside area is the floating planks. At the bottom wall, a short strip marks the transition at the doorway. Where the gap, planks, and doorway strip go Not to scale Expansion gap Floating planks Transition strip at the doorway
The gap runs along every wall, and the strip sits where the floor changes.

How wide should the gap be? Use the number printed in your guide. One Pergo revision says 3/8 inch and another says 1/4 inch. Wikipedia gives a general range of 1 to 10 mm (about 1/16 to 3/8 inch). The 3/8 inch revision adds a 1/2 inch gap and a T-molding for spans over 40 feet. Skipping the gap can make the floor buckle. Trim and moldings are made to cover that space.

Let the cartons rest before you open them. That guide says to lay them flat, unopened, in the install room for 48 to 96 hours. In very dry or very humid climates, it says at least 96 hours.

Budget From What You Buy

Price the boxes you carry home, not the room. Our calculator prices the whole boxes you buy. Ten boxes hold 8 x 1.6667 x 10 = 133.33 sq ft, so at an example price of $2.50 (not a quote) it shows $333.33.

Pricing only the 120 sq ft room would say $300 and miss the extra planks you must buy. Budget from the purchased area, and treat the room-area figure as a floor.

Before you order, scan this list of common slips:

  • Measuring only the open floor. Closets and alcoves count as floor area.
  • Skipping the round up. Planks and boxes are whole counts.
  • Forgetting the gap. Plan trim to cover it.
  • Pricing the room, not the boxes. The receipt follows the purchased area.
  • Skipping acclimation. Let the cartons rest first.

For a broader look at how flooring and tile counts work, see our guide to calculating flooring and tile quantities.

Ready to run your own room?

Enter your room size, plank size, waste, and box count in the laminate flooring calculator to get planks, boxes, underlayment, and transitions at once.

FAQs About Laminate Flooring Estimates

How much extra laminate should I buy?

One Pergo guide says to add 10 percent for a standard layout and 15 percent for a diagonal one. Then round up to whole boxes. Check your own manufacturer’s guide for its number.

How many boxes cover a 12 by 10 foot room?

With 48 by 5 inch planks, 8 planks per box, and 10 percent waste, you need 10 boxes. Your box label gives the real planks per box, so recheck with that number.

Do I round planks or boxes up?

Both. Round the plank count up after you add waste, then round the box count up. You cannot buy part of a box, and rounding down leaves you short.

How big should the expansion gap be?

Use the size printed in your installation guide. One Pergo revision says 3/8 inch and another says 1/4 inch. Wikipedia gives a general range of 1 to 10 mm.

How long should laminate sit before installation?

One Pergo guide says 48 to 96 hours, with unopened cartons lying flat in the install room. In very dry or very humid climates, it says at least 96 hours.

Do I need underlayment under laminate?

It depends on the plank. One Pergo guide says foam underlayment is needed when planks have no attached layer. Over concrete it calls for a 6-mil polyethylene film. Check your own guide.

Why does pricing only the room area come in under the receipt?

You pay for whole boxes, not just the room area. In our example that is 133.33 sq ft instead of 120, or $333.33 instead of $300 at an example price (not a quote). The calculator prices the boxes, so its total matches the receipt.

Sources and Further Reading

References Used in This Article

This article is general education. Always follow the installation guide packed with your own flooring, because it controls your warranty. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-10-14.


Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.