University Aggregate Calculator (Pakistan)

Read this first. This is a general, configurable aggregate tool. It does not assume one fixed weighting. Choose a verified preset, or switch to custom mode and type your own component names and weights. Either way the weights must add up to 100 percent.

The presets below were read on their official sources on 4 October 2026 and each is labelled with its session year. Admission weightings change every cycle and differ by university and program, so before you rely on any number, open the official notification for your university and admission year and confirm the split still matches.

• PMDC / UHS MBBS and BDS (2025-26): MDCAT 50 percent, FSc or HSSC 40 percent, Matric or SSC 10 percent.
• UET Lahore engineering, with ECAT (Fall 2026): Matriculation 17 percent, Intermediate First Year (Part-I) 50 percent, ECAT 33 percent. The no-test (Non-ECAT) route is Matric 25 percent and Part-I 75 percent.
• NUST on NET basis (current cycle): NET 75 percent, HSSC Part-1 or equivalent 15 percent, SSC 10 percent. The NUST page does not print a year, so re-check it for your cycle.
• NUMS MBBS and BDS (2025-26): NUMS entry test 50 percent, HSSC or FSc 40 percent, Matric 10 percent.
• Custom: for any other university or program, enter your own labels and weights. The tool never guesses a weighting.

1. Pick a preset or go custom. Tap a preset to fill the component names and weights, which stay editable, or tap Custom to clear them and type your own.
2. Enter each component name and weight. The weight is that component share of the aggregate in percent. All weights must total 100.
3. Add your marks and totals. For each component type the marks you obtained and the maximum marks, taken from your result card.
4. Read the result. The tool shows your aggregate percentage and how many points each component adds.

A university aggregate is a single merit percentage that blends two or more of your results into one number. Universities use it to rank applicants on a common scale instead of looking at each score on its own.

Each result carries a fixed weight set by the admitting authority. An entry test such as the MDCAT, ECAT or NET usually carries the largest share, your intermediate marks the next, and your matric marks the smallest. Because the weights add up to 100, the aggregate always lands between 0 and 100 percent.

The aggregate is not an admission guarantee. A university sets its closing merit each year from how many seats it has and who applies, so the same aggregate can win a seat one year and miss it the next. See the MDCAT aggregate calculator for the medical split in detail.

1. Turn each component into a percentage: marks obtained divided by its total, times 100.
2. Multiply each component percentage by its own weight expressed as a fraction (for example 40 percent is 0.40).
3. Add the weighted parts. The sum is your aggregate percentage.
4. The tool first checks that your weights total 100; if they do not, it shows a warning instead of a number.

This is the same weighted-average method used across admissions. See how to calculate a weighted grade or the weighted average calculator for the general idea.

Take the PMDC MBBS preset: MDCAT 50 percent, FSc 40 percent, Matric 10 percent. A student has Matric 980 out of 1100, FSc 950 out of 1100 and MDCAT 160 out of 200.

1. Matric: 980 / 1100 x 100 = 89.0909%. Part: 89.0909 x 10% = 8.9091.
2. FSc: 950 / 1100 x 100 = 86.3636%. Part: 86.3636 x 40% = 34.5455.
3. MDCAT: 160 / 200 x 100 = 80.0000%. Part: 80.0000 x 50% = 40.0000.
4. Aggregate: 8.9091 + 34.5455 + 40.0000 = 83.4545% (UHS rounds to four decimals).

Every figure here is reproduced in code, and the build fails if the math drifts. Use the marks percentage calculator if you only need the first step for one subject.

Because of the weights, the same number of extra marks moves your aggregate by very different amounts.

The Entry Test Usually Carries the Most

A test weighted at 50 to 75 percent is the strongest lever. In the NUST split the NET alone is 75 percent of the aggregate, so a few extra NET marks outweigh a big jump in matric.

Intermediate Marks Are the Second Half

FSc or First-Year marks usually carry 15 to 50 percent. At 40 or 50 percent they are nearly as powerful per percentage point as the test, so do not treat them as minor.

Matric Adds the Least

Matric or SSC often carries only 10 percent, so even a large change moves the aggregate a little. It still breaks ties when two applicants are close.

The Totals You Enter

Dividing by the wrong maximum shifts every percentage. Match each total to your own result card: 1100 or 1200 for boards, 200 for the current MDCAT or NET, 400 for ECAT, 550 for Part-I.

All four presets were read on their official sources on 4 October 2026. Each set of weights totals 100. Re-check the notification for your own admission year, because these change by cycle.

Note that PMDC and NUMS share the same 50/40/10 split but use different entry tests. Check the ECAT and NUMS tools for those programs on their own.

After Your Entry-Test Result

Combine your test, intermediate and matric results into one merit number as soon as the test score is out.

When Your University Is Not a Preset

Many universities publish their own split. Use custom mode to enter those exact labels and weights, instead of forcing your marks into a preset that does not fit.

To Compare Two Programs

Run your marks through two different weightings to see how the same results produce different aggregates under different rules.

To Check a Blog or App Figure

Re-run the numbers here, where every step is shown, rather than trusting a single figure with no working.

1. Weights That Do Not Total 100

The most common error. If the parts do not add to 100 the aggregate is meaningless, so the tool refuses to show one until you fix them.

2. Using Last Year Weighting

Weightings change by cycle. Confirm the split in the notification for your own admission year before you trust the result.

3. Mismatching the Total

Entering 1100-based marks against a 1200 total, or an MDCAT score against the wrong maximum, changes every percentage. Use your own result totals.

4. Mixing Up Intermediate Totals

Some universities use full HSSC marks and others use First-Year (Part-I) only. Enter the marks and total the official rule actually asks for.

5. Treating the Aggregate as a Prediction

This tool never predicts admission. Closing merit depends on seats and applicants each year and is not fixed.

The arithmetic is exact for the labels, weights and marks you enter. What it cannot know is how each authority and year will differ.

Turn each result into a percentage, multiply each by its official weight, then add the weighted parts. The weights must add up to 100 percent.

Use the one in the official notification for your university, program and admission year. Pick a verified preset if it matches, or enter your own weights in custom mode.

A weighted percentage only makes sense when the shares cover the whole. If the weights do not total 100 the tool shows a warning and no aggregate.

For 2025-26 public-sector admission it is MDCAT 50 percent, FSc or HSSC 40 percent and Matric or SSC 10 percent, from the PMDC Admission Regulations 2025.

For Fall 2026 the UET merit is Matriculation 17 percent, Intermediate First Year 50 percent and ECAT 33 percent. The no-test route is Matric 25 percent and Part-I 75 percent.

NUST weighs the NET at 75 percent, HSSC Part-1 or equivalent at 15 percent and SSC at 10 percent. The page does not print a year, so re-check it for your cycle.

NUMS uses its own entry test at 50 percent, HSSC or FSc at 40 percent and Matric at 10 percent for MBBS and BDS session 2025-26.

Yes. Choose Custom, enter your own component names and weights so they total 100, then add your marks. The tool never guesses a weighting.

No. It only computes your aggregate. Closing merit changes each year with seats and applicants, so no honest tool can promise a seat.

Use the maximum printed on your result card, for example 200 for the current national MDCAT or NET, or 400 for ECAT. The tool divides by whatever total you give.

No. The calculation runs in your browser and nothing is sent or stored. Save keeps a copy only in your own browser.

• PMDC Admission Regulations 2025 - MBBS and BDS weightage MDCAT 50, FSc 40, Matric 10 (Notification 10.02.2025, session 2025-26) (Pakistan Medical and Dental Council, read 2026-10-04).
• UET Lahore official merit calculator - Matric 17, First Year 50, ECAT 33 for Fall 2026 (Non-ECAT 25 and 75) (University of Engineering and Technology Lahore, read 2026-10-04).
• NUST merit generation criteria on NET basis - NET 75, HSSC Part-1 15, SSC 10 (National University of Sciences and Technology, read 2026-10-04).
• NUMS centralized admissions MBBS and BDS session 2025-26 - entry test 50, HSSC 40, Matric 10 (National University of Medical Sciences, read 2026-10-04).