Your recipe calls for 20 percent rose oil, but how many milliliters is that? A percent is only a ratio, so the answer depends on your batch size and on what the percent measures.
To calculate fragrance dilution, divide each ingredient’s percent by 100 and multiply by the batch size. For a target strength, multiply the batch by the target percent and divide by the material’s own strength. The carrier is the remainder. Always say whether the percents are by mass or by volume.
What a Percent Means in a Fragrance Recipe
A recipe percent is one ingredient’s share of the whole blend. That share can be counted by mass, in grams, or by volume, in milliliters. Both are valid, but they are not the same number.
Chemistry textbooks define mass percent as the mass of one part divided by the mass of the whole, times 100. Volume percent works the same way with volumes. You use one unit on top and bottom, so the units cancel.
NIST, the US standards agency, prefers the terms mass fraction and volume fraction. This article says percent by mass and percent by volume because most recipes do. The idea is identical.
Why does this matter? Liquids have different densities, so equal masses of two liquids usually take up different volumes. A recipe in grams and a recipe in milliliters can therefore describe different blends.
Label the type every time. A bare “20 percent” can mean two different amounts of oil.
Turning Recipe Percents Into Amounts
The rule is simple: amount = percent / 100 x batch size. Take a 50 mL perfume written in percent by volume. It is 70 percent ethanol, 20 percent rose oil, and 10 percent vanilla absolute. These are example numbers, not a recommendation.
| Ingredient | Percent by volume | Math | Amount |
|---|---|---|---|
| Ethanol | 70 | 50 x 0.70 | 35 mL |
| Rose oil | 20 | 50 x 0.20 | 10 mL |
| Vanilla absolute | 10 | 50 x 0.10 | 5 mL |
| Total | 100 | 35 + 10 + 5 | 50 mL |
Now a mass recipe. A 100 g blend has 8 percent bergamot oil, 5 percent lavender oil, and 4 percent cedarwood oil. You weigh 8 g, 5 g, and 4 g. That lists 17 g, so the other 83 g is the balance ingredient, here alcohol. You can check any recipe like this in the fragrance calculator, which fills any shortfall with a balance ingredient.
Finding the Material for a Target Strength
Sometimes you start from the strength you want, not from a recipe. The formula is material = batch x target % / material strength %. The carrier is then the batch minus the material. A pure material has a strength of 100 percent.
Say you want 30 mL at 15 percent from a pure material. The material is 30 x 15 / 100, which is 4.5 mL. The carrier is 30 minus 4.5, or 25.5 mL. That is a ratio of 1 part material to 5.67 parts carrier, since 25.5 / 4.5 is 5.67.
If you prefer to weigh, convert with density. Ethanol is about 0.789 g/mL, so 25.5 mL weighs 25.5 x 0.789, or 20.12 g. Like most home recipes, the tool treats volumes as adding up. That is a simplifying assumption, not a law.
To check your work, add the material and carrier back together. The total must equal the batch, here 4.5 + 25.5 = 30 mL.
Keep full decimals until the last step. Rounding the carrier early shifts the final percent.
Using a Pre-Dilution in Two Steps
A pre-dilution is a weaker stock you make first, then use as your material. It makes tiny amounts easier to measure. The formula stays the same, but the strength is now the stock’s strength, not 100 percent.
Suppose you want 20 g at 2 percent, starting from a 10 percent pre-dilution. You need 20 x 2 / 10, which is 4 g of the pre-dilution, plus 16 g of carrier. Making that 20 g stock at 10 percent takes 2 g of material and 18 g of carrier.
Why bother? A 2 percent target in a 20 g batch needs only 0.4 g of pure material. That is hard to measure. Measuring 4 g of stock is much easier. Only 4 g of the 20 g stock is used. That leaves 16 g, so you could make a smaller stock batch.
Why Percent by Mass and by Volume Disagree
One recipe gives two different percents, depending on how you measure it. Rubbing alcohol is usually sold as 70 percent isopropanol by volume. To get grams from 355 mL, you multiply 355 x 0.70 x 0.785 g/mL, which is about 195 g. Volume percent needs density to become mass.
Now apply that to example 3, the 15 percent blend. Assume an oil density of 0.90 g/mL. This is a round number for illustration, not a property of any real oil. The 4.5 mL of oil weighs 4.05 g, and the 25.5 mL of ethanol weighs 20.12 g.
By mass, the oil share is 4.05 / (4.05 + 20.12), which is 16.8 percent, not 15 percent.
| Feature | Percent by mass | Percent by volume |
|---|---|---|
| Measured with | A scale, in grams | A measuring tool, in mL |
| Formula | mass of part / mass of whole x 100 | volume of part / volume of whole x 100 |
| Needs density to convert | Yes, to get mL | Yes, to get grams |
| Oil share in example 3 | 16.8% | 15% |
Common Mistakes and the Safety Check
- Mixing mass and volume percents in one recipe, which makes the total meaningless.
- Measuring a mass recipe in mL without converting with density first.
- Forgetting the balance ingredient, so the parts add up to less than the batch.
- Treating the pre-dilution’s strength as pure material, which leaves the final blend too weak.
- Rounding the carrier too early, which shifts the final percent.
- Skipping the safety check, which no arithmetic can replace.
This article is arithmetic only. It gives no safe-use limits, because those depend on the ingredient and the product. IFRA, the International Fragrance Association, publishes the IFRA Standards, a risk management system for the safe use of fragrance. Read them and your supplier’s safety data sheet before you make or sell anything.
The same percent-of-batch math also appears elsewhere. See how much wax a candle needs and the general dilution calculations guide. A different base changes the math, as baker’s percentages show.
Enter your batch size and percents in the fragrance calculator. It returns each amount, and its page reminds you to check the IFRA Standards for restricted ingredients.
FAQs About Fragrance Dilution Percentages
How do I convert a recipe percent into milliliters?
Divide the percent by 100 and multiply by the batch size in milliliters. For example, 20 percent of a 50 mL batch is 0.20 x 50, which is 10 mL.
What does a 10 percent pre-dilution mean?
It means 10 percent of the stock is the pure material and the rest is carrier. A 20 g stock takes 2 g of material and 18 g of carrier.
Is percent by mass the same as percent by volume?
No. They match only by chance. In the example here, 15 percent by volume became 16.8 percent by mass, using an assumed oil density of 0.90 g/mL.
How much carrier do I add to the material?
Subtract the material from the batch size. For 30 mL at 15 percent from a pure material, you add 4.5 mL of material and 25.5 mL of carrier.
Do my recipe percents have to add up to 100?
Yes, because the whole blend is 100 percent. If your listed ingredients add up to less, the remainder is the balance ingredient, such as the 83 g of alcohol in a 100 g example.
Can I weigh a recipe that is written in milliliters?
Yes, but convert with density first. Ethanol is about 0.789 g/mL, so 25.5 mL weighs about 20.12 g. Each liquid has its own density, so look it up.
Does this article tell me what percent is safe?
No. It covers arithmetic only. Check the IFRA Standards and your supplier’s safety data sheet for safe use, restricted ingredients, and any limits that apply to your product.
Sources and Further Reading
References Used in This Article
- OpenStax, Chemistry 2e, section 3.4, Other Units for Solution Concentrations, accessed 2026-10-15.
- NIST, Guide for the Use of the International System of Units (SP 811), chapter 7, accessed 2026-10-15.
- International Fragrance Association, Safe Use and Fragrance Science, accessed 2026-10-15.
- Wikipedia, Ethanol (density figure), accessed 2026-10-15.
This article covers arithmetic only, not product safety. Check the IFRA Standards and your supplier’s safety data sheet before you make or sell anything. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-10-15.
Author
Shakeel is the Founder and Editor-in-Chief of MultiCalculators.com, with over 15 years of experience in digital publishing and online tool development. He oversees editorial quality, formula accuracy, and usability to ensure the platform delivers reliable, practical calculators for users worldwide.




