How to Read Your HYROX Split Sheet

A 90:00 HYROX target leaves only 39:00 for the eight stations once runs and Roxzone take their share. That is why every proportional target on a split sheet is longer than your current split.

Quick Answer

A HYROX split sheet lists your eight station times. The station share is each split divided by the station total, and the proportional target is that share of the time left after eight runs and Roxzone. In one example, a 90:00 target leaves 39:00 for stations, so each target runs longer than the current split.

The Eight Stations on a HYROX Split Sheet

The official HYROX page sets the format as “run 1km, followed by 1 functional workout station, repeated eight times.” A split sheet records your time at each of those eight stations. The table below lists them in race order, with the division loads the page gives.

HYROX stations in race order, with division loads from the official page
Station Distance or reps Women Women Pro Men Men Pro
1. SkiErg 1000 m None listed None listed None listed None listed
2. Sled Push 50 m (2×25 m) 102 kg 152 kg 152 kg 202 kg
3. Sled Pull 50 m (2×25 m) 78 kg 103 kg 103 kg 153 kg
4. Burpee Broad Jump 80 m None listed None listed None listed None listed
5. Rowing 1000 m None listed None listed None listed None listed
6. Farmers Carry 200 m 2×16 kg 2×24 kg 2×24 kg 2×32 kg
7. Sandbag Lunges 100 m 10 kg 20 kg 20 kg 30 kg
8. Wall Balls 100 reps 4 kg 6 kg 6 kg 9 kg

Sled weights include the sled itself. Rules and loads can change by season, so check the current official rulebook before you plan around any figure here. The tool also lists Open division names and doubles or relay entries.

How the Full-Race Estimate Adds Up

The HYROX station split calculator takes four inputs. You enter a target finish time, the eight splits in mm:ss, an average 1 km run pace and a total Roxzone time. Roxzone here is the transition time the tool calls Roxzone, the time between runs and stations that sits outside the eight splits.

The full-race estimate is 8 x run pace + station total + Roxzone. The tool uses exact time arithmetic and applies no performance coefficients. Your run pace is an input you set; for help finding it, see calculating your running pace.

Example 1 (“Open athlete”): a 90:00 target, run pace 5:30, Roxzone 7:00
Step Working Result
Station total 270 + 195 + 260 + 330 + 265 + 130 + 280 + 390 s 2,120 s = 35:20
Average split 2,120 / 8 265 s = 4:25
Run total 8 x 5:30 44:00
Roxzone Entered 7:00
Full-race estimate 35:20 + 44:00 + 7:00 86:20
Against the target 90:00 – 86:20 3:40 inside
The 86:20 estimate against a 90:00 target One horizontal bar drawn to scale in seconds. Runs take 2,640 seconds (44:00), stations take 2,120 seconds (35:20) and Roxzone takes 420 seconds (7:00), for 5,180 seconds (86:20). A dashed line marks the 90:00 target at 5,400 seconds. The gap between the end of the bar and the dashed line is 220 seconds, or 3:40 of room. Where the 86:20 comes from (bar drawn to scale) Target 90:00 3:40 of room 44:00 35:20 7:00 Runs 8 x 5:30 Stations sum of eight splits Roxzone entered Pink gap: the 220 seconds between the 86:20 estimate and the 90:00 target.
Runs hold 44:00, stations 35:20 and Roxzone 7:00 of the 86:20.

Station Share and the Proportional Target

A station share is one split divided by the station total. The wall balls split is 390 s, so 390 / 2,120 is 18.4 percent. That makes wall balls the largest share on this sheet.

The proportional target is the station budget times that share. The budget is the target minus eight runs minus Roxzone: 90:00 – 44:00 – 7:00 is 39:00, or 2,340 s. Then 2,340 x 390 / 2,120 is about 430 s, which the tool shows as 7:10.

Example 1: station share and proportional target
Station Split Share Target
SkiErg 4:30 12.7% 4:58
Sled Push 3:15 9.2% 3:35
Sled Pull 4:20 12.3% 4:47
Burpee Broad Jumps 5:30 15.6% 6:04
Row 4:25 12.5% 4:53
Farmers Carry 2:10 6.1% 2:23
Sandbag Lunges 4:40 13.2% 5:09
Wall Balls 6:30 18.4% 7:10
Total 35:20 100.0% 39:00

The shares add to 100 percent, and the targets add to the 39:00 budget within a second of rounding. Every row follows the same rule, so the shape of the sheet stays the same.

Current splits against proportional targets Eight pairs of horizontal bars drawn to scale in seconds from zero. For each station the navy bar is the current split and the teal bar is the proportional target. SkiErg 4:30 and 4:58, Sled Push 3:15 and 3:35, Sled Pull 4:20 and 4:47, Burpee Broad Jumps 5:30 and 6:04, Row 4:25 and 4:53, Farmers Carry 2:10 and 2:23, Sandbag Lunges 4:40 and 5:09, Wall Balls 6:30 and 7:10. Every teal bar is longer than its navy bar. Current split vs proportional target (bars start at 0 s) Current split Proportional target

SkiErg 4:30 4:58

Sled Push 3:15 3:35

Sled Pull 4:20 4:47

Burpee Broad Jumps 5:30 6:04

Row 4:25 4:53

Farmers Carry 2:10 2:23

Sandbag Lunges 4:40 5:09

Wall Balls 6:30 7:10

Splits total 35:20; targets total 39:00 (within a second of rounding).

Every target is longer than its split, and the largest pair belongs to the wall balls.

Why the Targets Are Ceilings

The budget is 39:00, but the splits total only 35:20. The difference is 3:40, or 220 s, which matches the room against the 90:00 target. The targets spread that larger budget in the same proportions, so each one is about 10.4 percent longer than its split (2,340 / 2,120 is 1.1038).

That makes each target a ceiling that keeps the same shape, not a goal to beat. Hit every target and the estimate lands exactly on 90:00. Come in under them and the estimate lands earlier.

Split Variability

The tool also reports split variability: the population standard deviation of the eight splits divided by their mean, times 100. For a refresher, see how standard deviation works.

The mean is 265 s. The deviations are +5, -70, -5, +65, 0, -135, +15 and +125, and their squares are 25, 4,900, 25, 4,225, 0, 18,225, 225 and 15,625. Those add to 43,250. Divide by 8 for 5,406.25, and the square root is 73.53 s. Then 73.53 / 265 is 27.7 percent.

A higher figure means the eight splits sit further apart relative to their average. It does not say whether that spread is good or bad.

A Different Shape: Three More Sheets

The same rules read a very different sheet. In example 2 (“Sled bottleneck”), the target is 95:00, the splits total 39:45, runs are 8 x 5:35 = 44:40 and Roxzone is 7:30. The estimate is 39:45 + 44:40 + 7:30, or 91:55, which is 3:05 inside the target.

The budget is 95:00 – 44:40 – 7:30, or 42:50. Sled Push, at 6:30, is the largest share at 16.4 percent (390 / 2,385), with a target of 7:00. Sled Pull follows at 6:10, a 15.5 percent share and a 6:39 target.

The two sleds hold 31.9 percent of the stations here, against 21.5 percent in example 1. Yet the variability is 27.4 percent, close to 27.7. Two different shapes can share almost the same variability.

Four sheets side by side (full-race estimate = 8 runs + stations + Roxzone)
Sheet Target Estimate Room Largest split (share, target)
1. Open athlete 90:00 86:20 3:40 Wall Balls 6:30 (18.4%, 7:10)
2. Sled bottleneck 95:00 91:55 3:05 Sled Push 6:30 (16.4%, 7:00)
3. Fast athlete 68:00 64:15 3:45 Wall Balls 4:20 (17.2%, 4:59)
4. First-time racer 105:00 104:00 1:00 Wall Balls 8:15 (18.3%, 8:26)

Example 3 shows the same rules at a faster scale: stations 25:15, runs 8 x 4:15 = 34:00 and Roxzone 5:00, for a 64:15 estimate. Example 4 has stations of 45:00, runs of 8 x 6:15 = 50:00 and Roxzone of 9:00, for 104:00. Its room is only 1:00, so any input that grows by 60 s uses the whole margin.

Quick Checks Before You Trust a Split Sheet

Run through this list before you act on any figure on the sheet.

  • The inputs set the answer. The tool does not know what a realistic Roxzone time or run pace is. The estimate is only as good as the numbers you enter.
  • Run pace is an average. The estimate adds no fatigue. For ways to estimate a pace, see running pace and race time predictions.
  • No share is ideal. A share describes your own sheet. It is not a standard that any athlete should match.
  • Rules and loads change by season. Check the current official rulebook for your division.

This is general fitness information, not coaching or medical advice.

Want to read your own sheet?

Enter your eight splits, run pace and Roxzone time in the HYROX station split calculator to see your shares, targets and full-race estimate.

FAQs About HYROX Split Sheets

What is a HYROX split sheet?

A split sheet lists your time for each of the eight stations in race order. The tool adds a run pace, Roxzone time and target so you can read those splits as shares of the whole.

How do I work out my HYROX station share?

Divide one station split by the total of all eight splits. In the example, 390 s of wall balls over a 2,120 s station total gives 18.4 percent.

What is a proportional target?

It is the station budget times a station’s share. With a 39:00 budget, the 18.4 percent wall balls share gives a 7:10 target, which is longer than the 6:30 split.

How is the full-race estimate calculated?

Add eight runs at your average pace, the total of the eight stations and your Roxzone time. The example adds 44:00, 35:20 and 7:00 to reach 86:20.

Why are my targets longer than my splits?

Targets share out the time left after runs and Roxzone. When that budget exceeds your station total, every target grows by the same ratio. The example has 39:00 against 35:20.

What does split variability measure?

It is the population standard deviation of the eight splits divided by their mean, times 100. The first example is 73.53 s over 265 s, or 27.7 percent.

Does the tool know a good Roxzone time or run pace?

No. You enter both, and the estimate is only as good as those numbers. The tool adds no fatigue and applies no performance coefficients. Check the current official rulebook for race rules.

Sources and Further Reading

References Used in This Article

This article is general fitness information, not training or medical advice. Race rules and loads change by season, so check the current official rulebook. Reviewed for accuracy by Dr. Abdullah Khalil, MBBS. Last updated 2026-10-26.


Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel is the Founder and Editor-in-Chief of MultiCalculators.com, with over 15 years of experience in digital publishing and online tool development. He oversees editorial quality, formula accuracy, and usability to ensure the platform delivers reliable, practical calculators for users worldwide.