How much of your first mortgage payment actually reduces what you owe? In the tool’s base example, a $2,135.42 payment sends just $260.75 to principal in month 1. The other $1,874.67 pays interest.
House amortization splits a level monthly payment into interest and principal. Interest equals the balance times the monthly rate, and principal is whatever is left of the payment. Take a $320,000 loan at an example 7.03 percent for 30 years. The tool returns $2,135.42 a month and $448,750.92 of total interest.
What an Amortization Schedule Shows
An amortization schedule is a payment-by-payment map of a fixed loan from the first month to the last. It lists each payment, the interest inside it, the principal inside it, and the balance left.
Wikipedia says an amortization calculator is “used to determine the periodic payment amount due on a loan”. The loan is typically a mortgage. The idea is simple: one fixed payment repeats until the balance reaches zero.
The House Amortization Calculator applies that idea to a home loan. It returns the monthly payment, total interest, and the total of all payments. It also shows the loan-to-value share and equity after 5 years.
This article explains the math behind those outputs. Every scenario figure below comes from the tool, and the rates are example inputs. You can follow each step by hand with a basic calculator.
The schedule matters because the payment never changes while its contents do. Early rows are mostly interest, and late rows are mostly principal. Seeing that shift row by row explains why a loan balance falls slowly at first.
The Formula Behind Every Level Payment
A fixed-rate loan uses one level payment for the whole term. Wikipedia gives the annuity formula as A = P x i / (1 – (1 + i)^-n).
Here A is the periodic payment, and P is the principal, net of the down payment. The letter i is the per-period interest rate, and n is the total number of payments.
For a monthly payment, the yearly rate is divided by 12 to get i. When i equals 0, the payment is simply P / n. The formula assumes the first payment is due one full period after the loan starts.
The tool uses the same method. It subtracts the down payment from the price to get the loan. Then it divides the APR by 1200 for the monthly rate.
| Input or output | Value |
|---|---|
| Home price | $400,000 |
| Down payment (20 percent) | $80,000 |
| Loan amount | $320,000 |
| Example APR and term | 7.03 percent, 30 years (360 payments) |
| Monthly principal and interest | $2,135.42 |
| Total interest over the loan | $448,750.92 |
The loan-to-value share at the start is 80 percent, because $320,000 is 80 percent of $400,000. All payments together total $768,750.92.
That total is the $320,000 loan plus $448,750.92 of interest. Interest is therefore more than the amount borrowed in this example. The term and the rate drive that result, which the next sections show.
Where the First Year of Payments Goes
Each month, the tool multiplies the balance by the monthly rate to find the interest. The rest of the level payment becomes principal, and the balance falls by that amount.
Month 1 shows the effect. Interest is $320,000 x (0.0703 / 12), which is $1,874.67. Principal is $2,135.42 minus $1,874.67, which is $260.75.
| Period | Total paid | Interest | Principal |
|---|---|---|---|
| Month 1 | $2,135.42 | $1,874.67 | $260.75 |
| First 12 payments | $25,625.04 | $22,393.19 | $3,231.85 |
About 87 percent of the first year’s payments go to interest. The balance shrinks each month, so interest shrinks too. The payment stays level, which means the principal share grows over time. Month 2 therefore pays slightly less interest than month 1.
That small shift repeats for 360 payments. Late in the term, the same level payment is mostly principal. The schedule shows this turn row by row.
Equity after 5 years is $98,682.53, about 24.7 percent of the price. The tool adds the down payment to the principal repaid in the first 60 payments. The equity figure is capped at the price.
What Extra Payments Do to the Loan
The tool accepts three kinds of extras. One is a fixed amount every month, and another is an amount once a year. The last is a one-time lump sum at a chosen payment number.
The final payment is trimmed so it never overpays the balance. Extra principal lowers the balance sooner, so each later month’s interest is smaller. The required payment itself stays the same.
The yearly option works the same way, applied on every 12th payment. Timing matters because an early extra payment lowers the balance for more months.
| Scenario | Total interest | Interest saved | Payments to payoff |
|---|---|---|---|
| Base loan, no extras | $448,750.92 | None | 360 |
| Extra $200 every month | $328,935.81 | $119,815.11 | 278 |
| One-time $20,000 at payment 12 | $340,837.11 | $107,913.80 | Not listed |
The $200 monthly extra ends the loan in 278 payments. That is 82 months, or 6 years 10 months, sooner than 360 payments. The tool shows each saving from its unrounded totals, so a one-cent gap appears when you subtract.
A Shorter Term Against Extra Payments
A shorter term raises the payment but cuts the interest. The tool’s example uses the same $320,000 loan at 6.42 percent for 15 years, which is 180 payments.
The monthly principal and interest is $2,773.49. Total interest is $179,228.12, which is less than half of the 30-year interest of $448,750.92.
The monthly payment is $638.07 higher than the 30-year payment of $2,135.42. The 15-year example also uses a lower example rate, so the two loans differ in both rate and length. Read the comparison as two example inputs, not as a rule about rates.
Both scenarios shorten the payoff, but they do it in different ways. The 15-year loan ends at payment 180. The $200 extra path ends at payment 278.
The two routes work differently. The $200 extra sits on top of the same required payment, while the 15-year loan changes the payment itself. For a payoff date view, see the mortgage payoff calculator.
What the Calculator Leaves Out
The tool shows principal and interest only. Read the list below as a checklist of what sits outside its numbers.
- Other housing costs. The tool leaves out property tax, homeowners insurance, PMI, HOA dues and escrow. The real monthly housing cost is higher.
- A fixed rate. The tool assumes one rate for the whole term, so it does not model a changing rate.
- Example rates. The 7.03 percent and 6.42 percent figures are example inputs, not current averages. Freddie Mac’s Primary Mortgage Market Survey publishes current average mortgage rates.
- Your actual loan. The tool does not know your lender’s terms, so check your own loan statement.
Lenders report the mortgage interest a borrower paid during the year on Form 1098, as IRS Publication 936 describes. This article gives no tax advice and claims no deduction outcome.
Real rates vary by borrower and change over time. Check the Freddie Mac survey or your lender before you compare any rate with these examples.
For the wider monthly picture, try the mortgage calculator and the PMI calculator. This is general information, not advice to buy a home, take a loan or refinance.
A Simple Way to Read Your Own Results
Run the tool in a fixed order so each number has a clear meaning. Change one input at a time, and note what moves.
- Start with the loan. Enter the price and the down payment. The tool subtracts one from the other to get the loan amount.
- Add the rate and term. Enter your APR and the years. The term becomes the number of payments.
- Read the monthly payment. This level amount is principal and interest only.
- Check total interest. This figure adds up the interest part of every payment.
- Test one extra. Add a monthly, yearly or lump-sum amount, and compare the payoff count and total interest.
Keep the other inputs fixed while you test an extra. Then the change you see comes from one input only. Compare the results with your own loan statement. The tool does not know your actual loan terms, so treat its output as a worked illustration.
Enter a price, down payment, rate and term in the House Amortization Calculator. You will see the monthly payment, the total interest and the effect of extra payments.
FAQs About Home Loan Amortization
What is house amortization?
House amortization is the process of repaying a home loan with level payments. Each payment covers the interest first, and the rest reduces the principal balance.
How is the monthly mortgage payment calculated?
The tool uses the annuity formula: payment = L x r / (1 – (1 + r)^-n). Here L is the loan, r is the APR divided by 1200, and n is the number of payments.
Why is most of an early payment interest?
Interest equals the balance times the monthly rate, and the balance is largest at the start. In the example, $1,874.67 of the first $2,135.42 payment is interest.
How much of the first year’s payments go to interest?
In the tool’s base example, the first 12 payments hold $22,393.19 of interest and $3,231.85 of principal. About 87 percent of the first year goes to interest.
How much do extra mortgage payments save in the example?
An extra $200 every month saves $119,815.11 in interest and ends the loan in 278 payments, 82 months early. A one-time $20,000 at payment 12 saves $107,913.80.
Does a 15-year term cost less interest than a 30-year term?
In the example, yes. The 15-year loan at 6.42 percent has $179,228.12 of interest against $448,750.92 at 7.03 percent for 30 years. The rates are examples.
What does the calculator not include?
It shows principal and interest only. Property tax, homeowners insurance, PMI, HOA dues and escrow are left out, and it assumes a fixed rate for the whole term.
Sources and Further Reading
References Used in This Article
The tool computes a level payment, then splits each one into interest and principal and shows how extra payments shorten the loan. It covers principal and interest only, so add your taxes, insurance and any PMI, and check current rates before you rely on a figure. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-11-21.
Author
Shakeel is the Founder and Editor-in-Chief of MultiCalculators.com, with over 15 years of experience in digital publishing and online tool development. He oversees editorial quality, formula accuracy, and usability to ensure the platform delivers reliable, practical calculators for users worldwide.




