Metric Prefixes From Micro to Exa: A Plain Guide for Mass Units

How many kilograms are in a teragram? A trillion is the common guess. The real answer is one billion, because the kilogram already carries a prefix of its own.

Quick Answer

A metric prefix multiplies a unit by a power of ten, such as micro (10−6), giga (109), or exa (1018). The kilogram already contains kilo, so mass prefixes attach to the gram instead. To reach kilograms, subtract 3 from the prefix power. One gigagram is 106 kg.

The Metric Prefix Ladder From Micro to Exa

A metric prefix is a short word part that multiplies a unit by a power of ten. Put “giga” in front of “gram” and you get a unit one billion times larger than a gram. The prefix name attaches directly to the unit name, so 1 km equals 1000 m.

NIST lists 24 SI prefixes, running from 1030 down to 10−30. Four of them (quetta, ronna, ronto, and quecto) were added in 2022. The table below follows the ladder from micro to exa and shows what each step means for mass.

Gram prefixes from micro to exa, converted to kilograms
Prefix Unit and symbol Power of ten (grams) Kilograms in one unit Tonne name
micro microgram, µg 10−6 10−9 kg none
milli milligram, mg 10−3 10−6 kg none
mega megagram, Mg 106 103 kg tonne (t)
giga gigagram, Gg 109 106 kg kilotonne (kt)
tera teragram, Tg 1012 109 kg megatonne (Mt)
peta petagram, Pg 1015 1012 kg gigatonne (Gt)
exa exagram, Eg 1018 1015 kg not covered here

The ladder also holds kilo (103), hecto, deka, deci, and centi in between. Past exa come zetta (1021) and yotta (1024). Notice that the kilogram column is always three powers lower than the gram column. The next section explains why.

Why the Kilogram Breaks the Pattern

For historical reasons, the name kilogram already contains the prefix kilo. NIST states that compound prefixes are unacceptable. So prefix symbols for multiples and submultiples of mass attach to the gram, never to the kilogram.

NIST gives a clear example. One millionth of a kilogram is written 1 mg (one milligram), not 1 microkilogram. That is why the ladder above is built on grams and not on kilograms. Think of the gram as the true starting point for prefix math, and of the kilogram as simply 1,000 grams.

The side effect is a built-in factor of 1,000. A gram is 10−3 kg, so every gram-based unit carries it. The diagram shows three examples of the same shift.

The kilogram shift: subtract 3 from the power Two rows of three boxes. The top row shows gram units: mega is 10 to the 6 grams, giga is 10 to the 9 grams, tera is 10 to the 12 grams. Arrows point down, each labeled minus 3. The bottom row shows the same masses in kilograms: 10 to the 3, 10 to the 6, and 10 to the 9 kilograms. Grams to kilograms: the power drops by 3 Mega (Mg) 10^6 g Giga (Gg) 10^9 g Tera (Tg) 10^12 g minus 3 minus 3 minus 3 10^3 kg 10^6 kg 10^9 kg The kilo hidden inside kilogram accounts for the 3.
Every gram prefix loses three powers of ten on the way to kilograms.

Converting Gram Prefixes to Kilograms Step by Step

The rule has one line: kilograms equal the prefix power minus 3. Three short steps put it to work for any gram prefix on the ladder.

  1. Name the prefix and its power. Giga is 109, so one gigagram is 109 grams.
  2. Subtract 3 from the power. That gives 109−3, which is 106 kilograms per gigagram.
  3. Multiply, or move the decimal point. Move it that many places to the right to reach kilograms.

Take 842.7 Gg. Moving the decimal six places right gives 842,700,000 kg. That is also 842.7 kt. The gigagram to kilogram converter returns the same figure and shows the method.

To go the other way, reverse the steps. Move the decimal point to the left by the same number of places. A big number in kilograms then shrinks into a short, readable figure.

Moving the decimal point from gigagrams to kilograms A left box shows 842.7 Gg. Six numbered circles on an arrow show the decimal point moving six places to the right. A right box shows the result, 842,700,000 kg. A note says kilograms to teragrams moves nine places left. Gg to kg: six places right 842.7 Gg 1 2 3 4 5 6 842,700,000 kg decimal point moves Going back, from kg to Tg, move the point 9 places left.
One worked example, shown as six steps of the decimal point.

Worked Examples in Both Directions

Each example below uses the same rule. Because only a decimal point moves, every result is exact.

  • 500 µg to kg: micro is 10−6, and subtracting 3 gives 10−9. So 500 × 10−9 = 5 × 10−7 = 0.0000005 kg. Try it in the microgram to kilogram converter.
  • 15 Tg to kg: 15 × 109 = 15,000,000,000 kg. That equals 15 Mt.
  • 6,343 Tg to Pg: 6,343 × 109 kg is 6.343 × 1012 kg. Since 1,000 Tg make 1 Pg, the answer is 6.343 Pg.
  • 2.4 × 1015 kg to Eg: one exagram is 1015 kg, so the answer is 2.4 Eg.
  • 5,000,000,000,000 kg to Pg: one petagram is 1012 kg, so 5 × 1012 kg is simply 5 Pg. A long string of zeros becomes one short figure.

If scientific notation feels rusty, our guide to exponents and scientific notation walks through the basics.

Tonne Names for Gg, Tg, and Pg

A metric ton, or tonne (symbol t), equals 1,000 kg. That makes one megagram exactly one tonne. Wikipedia notes that the megagram is the exact SI unit for the same mass.

NIST says prefixes may be used with the tonne, which gives familiar names. One gigagram is a kilotonne (kt). One teragram is a megatonne (Mt), or one million metric tons. One petagram is a gigatonne (Gt), or one billion metric tons.

Gram prefixes and their tonne names Four blocks of increasing height from left to right. Mg equals one tonne, 10 to the 3 kilograms. Gg equals one kilotonne, 10 to the 6 kilograms. Tg equals one megatonne, 10 to the 9 kilograms. Pg equals one gigatonne, 10 to the 12 kilograms. Each step is 1,000 times larger. Each step up is 1,000 times heavier Mg 1 tonne (t) 10^3 kg Gg 1 kilotonne (kt) 10^6 kg Tg 1 megatonne (Mt) 10^9 kg Pg 1 gigatonne (Gt) 10^12 kg x1,000 x1,000 x1,000 Block heights are a sketch, not to scale.
The tonne names climb the same ladder, one thousand at a time.

Watch the word “ton.” A US ton is 2,000 pounds, about 907 kg, which is lighter than a 1,000 kg tonne. Our metric vs imperial conversion guide covers that gap. To check big numbers, use the teragram to kilogram converter or the petagram to kilogram converter.

Why Kilo Means 1,000 and Not 1,024

In the SI, kilo always means exactly 1,000. Mega means 1,000,000, and giga means 1,000,000,000. The prefixes are powers of ten, with no exceptions. That clean rule is why moving up or down the ladder only shifts a decimal point.

NIST says alternative definitions are not permitted. It is unacceptable to use kilo for 210 = 1,024, mega for 220 = 1,048,576, or giga for 230. Separate IEC binary prefixes exist for those uses.

This matters for mass because every conversion above depends on exact powers of ten. If kilo flipped between 1,000 and 1,024, a gigagram would have no single value. For the computer side of the story, see our guide to data storage units.

Common Prefix Mistakes to Avoid

Most errors come from the same few traps. Check this list before you trust a result.

  • Writing “microkilogram.” NIST says to write milligram instead, because mass prefixes attach to the gram.
  • Mixing Mg and mg. A capital M is a megagram (1,000 kg). A lowercase m is a milligram (10−6 kg). Upper and lower case matter.
  • Forgetting the built-in kilo. Skipping the minus 3 makes your answer off by a factor of 1,000.
  • Using kilo as 1,024. In the SI, it is always 1,000.
  • Mixing metric and short tons. A US ton is lighter than a tonne.
  • Swapping Gg and Gt. A gigagram is a thousand tonnes. A gigatonne is a billion tonnes.

A quick sanity check catches most of these slips. Ask whether the answer should be bigger or smaller than your starting number, and by roughly how many zeros.

Want a quick, exact answer?

Enter your number in the gigagram to kilogram converter or the teragram to kilogram converter. Each converts in both directions.

FAQs About Metric Prefixes

How many kilograms are in a gigagram?

One gigagram is 1,000,000 kilograms, which equals one kilotonne. Gigagram means a billion grams, and dividing by 1,000 for the kilo in kilogram leaves a million kilograms.

Why is it milligram and not microkilogram?

NIST says compound prefixes are unacceptable. The kilogram already contains a prefix, so mass prefixes attach to the gram. One millionth of a kilogram is written 1 mg.

Is a teragram the same as a million metric tons?

Yes. One teragram is one billion kilograms, and a metric ton is 1,000 kg. So 1 Tg equals one million metric tons, also called one megatonne.

What is the difference between Mg and mg?

Mg, with a capital M, is a megagram, which is 1,000 kg or one tonne. mg, with a lowercase m, is a milligram, one millionth of a kilogram. Case matters.

How many gigagrams make a teragram?

One thousand. Each named step on the ladder from giga to tera is 1,000 times larger. So 1,000 Gg equal 1 Tg, and 1,000 Tg equal 1 Pg.

What prefix comes after exa?

Zetta, symbol Z, comes next at a one followed by 21 zeros. After it come yotta, ronna, and quetta, which tops the NIST list. So 5,100 Eg equal 5.1 Zg.

Does kilo ever mean 1,024 in the SI?

No. NIST calls it unacceptable to use kilo for 1,024. In the SI, kilo always means 1,000, and separate IEC binary prefixes exist for powers of two.

Sources and Further Reading

References Used in This Article

This article is a general units guide. For official work, check the unit rules of your own standard or style guide. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-10-15.


Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel is the Founder and Editor-in-Chief of MultiCalculators.com, with over 15 years of experience in digital publishing and online tool development. He oversees editorial quality, formula accuracy, and usability to ensure the platform delivers reliable, practical calculators for users worldwide.