How many gallons does your pool really hold? Picture a pool 30 feet long and 15 feet wide. With a 6 foot average depth it holds about 20,197 gallons, but at 5 feet it holds only about 16,831. That one number, average depth, moves the answer by more than 3,000 gallons.
To find pool volume in gallons, multiply surface area by average depth to get cubic feet, then multiply by 7.48. Rectangles use length times width. Round pools use pi times the radius squared. Ovals use pi times half the length times half the width. A 30 by 15 foot pool averaging 6 feet deep holds about 20,197 gallons.
The Core Formula: Cubic Feet Times 7.48
Pool volume in gallons equals the water volume in cubic feet times 7.48052. Every shape uses this same last step. Only the way you find cubic feet changes.
The factor comes from two standard unit facts. One US gallon is 231 cubic inches, and one cubic foot is 1,728 cubic inches. Divide 1,728 by 231 and you get 7.4805 gallons in each cubic foot.
That gives you a simple three-move plan. First, find the surface area in square feet. Second, multiply by the average depth in feet to get cubic feet. Third, multiply by 7.48052. If you want a fast check, our pool volume calculator runs all three moves at once.
Try a quick case. Say your pool holds 100 cubic feet of water. Multiply 100 by 7.48052 and you get about 748 gallons. The same idea scales to any pool, as long as every length is in feet.
Average Depth for a Sloping Floor
Average depth is the shallow depth plus the deep depth, divided by two. This works when the floor slopes evenly from one end to the other. A pool that runs from 4 feet to 8 feet has an average depth of 6 feet.
The average lets you treat a sloped pool like a plain box of water. The picture below shows why. The dashed line marks 6 feet, and it meets the floor right in the middle of the slope.
Averaging only works for an even slope. If your pool has a flat shallow shelf and then a drop, split it into sections. Find each section’s volume with its own average depth, then add the results.
Measure depth from the water level you plan to hold, since that is the water you are counting. If a depth comes in feet and inches, convert it first. A depth of 3 feet 6 inches is 3.5 feet.
Formulas for Rectangle, Round, Oval, and Freeform Pools
Each shape has its own area step, then the same depth and gallon steps. The table lists all four. Use average depth in place of depth whenever the floor slopes.
| Shape | Surface area | Gallons formula | Note |
|---|---|---|---|
| Rectangle | L x W | L x W x average depth x 7.48052 | Most common starting point |
| Round | pi x (diameter / 2)^2 | pi x (diameter / 2)^2 x depth x 7.48052 | Halve the diameter first |
| Oval | pi x (L / 2) x (W / 2) | pi x (L / 2) x (W / 2) x depth x 7.48052 | An oval is an ellipse |
| Freeform or kidney | L x W (bounding box) | L x W x average depth x 7.48052 x 0.85 | The 0.85 is the calculator’s approximation |
The oval formula comes from the area of an ellipse, which is pi times its two half-axes. For a freeform pool, no single formula fits. The calculator shrinks the box volume by a 0.85 shape factor. That factor is an approximation, not a published standard.
For example, a freeform pool in that same 30 by 15 foot box at 6 feet average depth would estimate about 17,168 gallons. Treat that as a rough figure. For other solid shapes, try our volume calculator.
Three Worked Examples With the Math
Here are three pools, each done step by step. Every example ends with the 7.48052 conversion.
- Rectangle, 30 x 15 ft, 4 to 8 ft deep. Average depth is (4 + 8) / 2 = 6 ft. Volume is 30 x 15 x 6 = 2,700 cubic feet. Times 7.48052 gives about 20,197 gallons.
- Round, 18 ft across, 4 ft deep. The radius is 9 ft. Volume is pi x 9^2 x 4 = 1,017.9 cubic feet. Times 7.48052 gives about 7,614 gallons.
- Oval, 24 x 12 ft, 5 ft average depth. Volume is pi x 12 x 6 x 5 = 1,130.97 cubic feet. Times 7.48052 gives about 8,460 gallons.
Look at how depth changes the ranking. The round pool has more surface area than the oval, about 254 square feet against 226. Yet it holds less water, because it is only 4 feet deep and the oval averages 5 feet.
Gallons, Liters, and Fill Time
One US gallon equals 3.78541 liters, so you multiply gallons by that figure to get liters. The 20,197 gallon rectangle is about 76,455 liters. Our gallons to liters converter and liters to gallons converter handle the swap in either direction.
Fill time is gallons divided by flow rate in gallons per minute. At an example rate of 8 gallons per minute, the rectangle takes 20,197 / 8 = about 2,525 minutes, or roughly 42 hours. At 20 gallons per minute it takes about 1,010 minutes, or roughly 16.8 hours. Those flow rates are examples, so time your own fill source.
Depth is the biggest lever. This table keeps the same 30 by 15 foot footprint and changes only the average depth. Each extra foot adds about 3,366 gallons here, since 450 square feet times 7.48052 is about 3,366.
| Average depth | Cubic feet | US gallons |
|---|---|---|
| 5 ft | 2,250 | 16,831 |
| 6 ft | 2,700 | 20,197 |
| 7 ft | 3,150 | 23,564 |
Measuring Mistakes That Skew the Number
Most wrong answers come from a few small slips. Watch for these before you trust a figure.
- Using the deepest depth. Multiplying the 30 by 15 pool by 8 feet gives about 26,930 gallons, which is over 6,700 too high.
- Averaging a shelf and a slope. Split the pool into sections instead.
- Mixing units. Convert inches to feet before you multiply, or the result will be far off.
- Using the diameter as the radius. That makes a round pool four times too large.
- Rounding too early. Keep the decimals until the final step.
- Skipping a second check. Measure twice, then compare your hand result with the calculator.
Once you trust your gallon figure, treatment questions are a separate topic. Our guide on how much water and chemicals your pool needs covers that, and this article makes no dosing claims.
Enter your shape and depths in the pool volume calculator to get gallons and liters in seconds.
FAQs About Pool Volume
How many gallons are in one cubic foot?
About 7.48 US gallons. That comes from dividing the 1,728 cubic inches in a cubic foot by the 231 cubic inches in one gallon.
How do I find the average depth of a sloped pool?
Add the shallow depth and the deep depth, then divide by two. This works only when the floor slopes evenly from one end to the other.
How many gallons is a 30 by 15 foot pool?
With a 4 foot shallow end and an 8 foot deep end, it holds about 20,197 gallons. At a 5 foot average depth it holds about 16,831 gallons.
How do I calculate the volume of a round pool?
Halve the diameter to get the radius, square it, and multiply by pi and the depth. Then multiply by 7.48052. An 18 foot pool, 4 feet deep, holds about 7,614 gallons.
How accurate is the freeform pool estimate?
It is a rough estimate. The calculator multiplies the box volume by 0.85, its own approximation and not a published standard. Measure carefully and expect some error.
How long does it take to fill a pool?
Divide the gallons by your flow rate in gallons per minute. A 20,197 gallon pool filled at an example 8 gallons per minute takes about 42 hours.
How many liters are in a 20,197 gallon pool?
Multiply gallons by 3.78541. A 20,197 gallon pool holds about 76,455 liters.
Sources and Further Reading
References Used in This Article
- National Institute of Standards and Technology, SP 811 Appendix B.9, conversion factors for volume, accessed 2026-10-13.
- Wikipedia, Gallon (US gallon definition and liter equivalent), accessed 2026-10-13.
- Wikipedia, Ellipse (area equals pi times the two half-axes), accessed 2026-10-13.
This article is general education. Pool shapes and depths vary, so measure your own pool and confirm any figure before you buy water treatment or equipment. Reviewed for accuracy by Prof. Dr. Khalil Mudassar, PhD. Last updated 2026-10-13.
Author
Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.




