Gravel Calculator

Quick answer

A gravel calculator estimates how much gravel you need by area and depth. Enter dimensions for a rectangle, circle or triangle, pick a gravel type and get cubic yards, tons and bag counts with a waste buffer. A 20 by 10 foot area 3 inches deep needs about 1.94 cubic yards of pea gravel. Confirm quantities with your supplier.

Updated 2026-10-14Reviewed by Prof. Dr. Khalil Mudassar, PhD
Try
Construction and Home Improvement
Choose the shape that best fits your project area.
For a rectangle or triangle, enter the length in feet. For a circle, enter the diameter.
Width for a rectangle, or height for a triangle. Not used for circles.
Depth of gravel in inches. Common depths: 2 inches for walkways, 3-4 inches for driveways.
Select a gravel type. Densities are typical averages; actual weight varies by source and moisture.
Only used when gravel type is set to Custom. Enter the density in tons per cubic yard.
Extra material for settling, compaction and spillage. 5% is typical; use 10% for irregular areas.
Optional: enter the price per ton to get a cost estimate. Leave blank to skip.
Optional: enter the price per cubic yard if you prefer that unit. Leave blank to skip.

Gravel needed (cubic yards)

--
Volume before waste--
Weight (tons / lb)--
Bags (0.5 cu ft)--
Bags (50 lb)--
Estimated cost--

Calculations run in your browser. Inputs are not sent to our servers; anything you Save stays in this browser only.

Saved results (0)

How to Use the Gravel Calculator

  1. Choose the shape of your area: rectangle, circle or triangle.
  2. Enter the dimensions in feet. For a rectangle, enter length and width. For a circle, enter the diameter. For a triangle, enter the base and height.
  3. Enter the depth of gravel in inches. Common choices: 2 inches for walkways, 3 to 4 inches for driveways and patios.
  4. Select the gravel type. Each type shows a typical density. Or pick Custom and enter your own density.
  5. Adjust the waste percentage if needed. The default is 5%.
  6. Optionally enter a price per ton or per cubic yard for a cost estimate.
ResultWhat it tells you
Cubic yards (with waste)Total gravel volume to order, including the waste buffer.
Volume before wasteThe raw calculated volume in cubic yards and cubic feet.
WeightApproximate weight in tons and pounds, based on the gravel density selected.
Bags (0.5 cu ft)Number of typical half-cubic-foot retail bags needed.
Bags (50 lb)Number of typical 50-pound retail bags needed.
Estimated costA rough cost if you entered a price per ton or per cubic yard.

What Is a Gravel Calculator?

The amount of gravel depends on three things: the area you want to cover, the depth of gravel, and the type of gravel (which determines how heavy it is per cubic yard).

Most residential projects use 2 to 4 inches of depth. A walkway might need only 2 inches, while a driveway should have 3 to 4 inches for a stable base. For French drains or below a patio, you may need 4 to 6 inches.

Gravel is sold by the cubic yard for bulk delivery or by the bag at retail stores. One cubic yard equals 27 cubic feet and covers about 108 square feet at 3 inches deep. Suppliers usually sell by the ton, so knowing the weight matters as much as the volume.

How Does the Gravel Calculator Work?

The calculator finds the volume of the area, converts it to cubic yards, applies a waste buffer, and then converts to weight using the gravel density.

Formulas:
Rectangle: volume = length x width x depth
Circle: volume = pi x (diameter / 2)^2 x depth
Triangle: volume = 0.5 x base x height x depth
Cubic yards = volume in cubic feet / 27
Tons = cubic yards x density (tons per cubic yard)
  1. Convert the depth from inches to feet by dividing by 12.
  2. Calculate the volume in cubic feet using the shape formula.
  3. Divide by 27 to get cubic yards.
  4. Multiply by (1 + waste %) for the adjusted volume.
  5. Multiply cubic yards by the density to get tons.

Why Density Matters

Different types of gravel have different weights per cubic yard. Pea gravel and crushed stone are around 1.4 tons per cubic yard, while decomposed granite and limestone are closer to 1.5 tons per cubic yard. River rock is slightly lighter at about 1.35 tons per cubic yard. Actual weight varies by source, size, shape and moisture content, so always confirm with your supplier.

Gravel Calculation Example

Say you need to fill a 20 by 10 foot rectangular area with pea gravel 3 inches deep.

Step 1, depth in feet: 3 inches / 12 = 0.25 feet.

Step 2, volume: 20 x 10 x 0.25 = 50 cubic feet.

Step 3, cubic yards: 50 / 27 = 1.85 cubic yards.

Step 4, add 5% waste: 1.85 x 1.05 = 1.94 cubic yards.

Step 5, weight: 1.94 x 1.4 = 2.72 tons (about 5,444 pounds).

Bags: You would need about 105 half-cubic-foot bags or 109 fifty-pound bags.

As a second example, a circular pad 12 feet in diameter at 4 inches deep with crushed stone needs about 1.40 cubic yards (37.7 cubic feet) and weighs about 1.95 tons.

Gravel Types and Densities

Gravel comes in many varieties. The density determines how much a cubic yard weighs. All densities here are typical industry averages. Actual values vary by quarry, moisture and gradation.

Gravel typeTypical densityCommon uses
Pea gravel~1.4 tons/cu yd (2,800 lb)Walkways, patios, drainage, garden beds
Crushed stone~1.4 tons/cu ydDriveways, road base, retaining wall backfill
River rock~1.35 tons/cu ydLandscaping, dry creek beds, decorative borders
Decomposed granite~1.5 tons/cu ydPaths, xeriscaping, patio surfaces
#57 stone~1.4 tons/cu ydDrainage, French drains, concrete aggregate
Limestone~1.5 tons/cu ydDriveways, base material, soil amendment

The density range across gravel types is roughly 1.2 to 1.7 tons per cubic yard. If your supplier gives you a specific weight per yard, use the Custom option for the most accurate result.

Factors That Affect How Much Gravel You Need

Depth depends on the project. Here are typical guidelines.

ProjectTypical depth
Walkway or garden path2 inches
Patio surface2 to 3 inches
Driveway (top layer)3 to 4 inches
Driveway (full build-up)8 to 12 inches total
French drain4 to 6 inches
Under a concrete slab4 inches

Thicker layers are heavier and more expensive but last longer and resist displacement. A concrete calculator can help if you are pouring a slab on top of the gravel base.

Cubic Yards vs Tons: Which to Order?

Gravel suppliers sell by the cubic yard, by the ton, or both. The difference matters because the same volume of different gravels weighs different amounts.

Order by the Cubic Yard

If you know exactly how much space to fill, ordering by volume is straightforward. One cubic yard fills a 3 x 3 x 3 foot box.

Order by the Ton

Many quarries and delivery trucks weigh their loads. If the supplier prices by the ton, knowing the weight saves you from overpaying.

Converting Between the Two

Multiply cubic yards by the density (tons per cubic yard) to get tons. Divide tons by density to get cubic yards. The calculator does both for you.

Buying Gravel in Bags vs Bulk

Small projects under about 1 cubic yard can use bagged gravel from a hardware store. Larger projects are cheaper with a bulk delivery.

Bagged Gravel

Typical bags are 0.5 cubic feet. For a small patio you might need 50 to 100 bags, which gets expensive fast. Bags work well for filling small gaps or topping up a thin area.

Bulk Delivery

A dump truck delivery of 5 or more cubic yards is usually the cheapest per-yard price. Most suppliers have a minimum order of 1 to 3 cubic yards. Ask about delivery fees before ordering.

The calculator shows both bag counts so you can compare options.

When to Use a Gravel Calculator

Planning a Driveway or Patio

A gravel driveway or patio needs an exact volume to avoid under-ordering or wasting money on excess material. The calculator gives you cubic yards and tons in seconds.

Comparing Bulk Delivery vs Bags

If you are deciding between hauling bags from the store or scheduling a bulk delivery, the bag counts and cost estimate help you compare.

Budgeting a Landscaping Project

Enter your supplier's price per ton or per cubic yard to get a rough cost before you commit. Pair it with a mulch calculator or topsoil calculator if the project includes other materials.

French Drains and Base Layers

Drainage projects and slab prep require specific gravel depths. The calculator handles circles, triangles and rectangles so you can match the shape to your trench or pad.

Common Mistakes When Ordering Gravel

1. Forgetting Waste and Compaction

Gravel compacts when driven over or rained on. A 5 to 10 percent buffer prevents a second trip to the supplier.

2. Mixing Up Cubic Yards and Cubic Feet

One cubic yard equals 27 cubic feet, not 3. Confusing the two leads to ordering far too little.

3. Measuring in the Wrong Units

Enter feet for length and width, inches for depth. Mixing feet and inches in the wrong boxes throws the answer off by a factor of 12.

4. Ignoring Gravel Density

A cubic yard of lightweight river rock weighs less than a cubic yard of dense limestone. If the supplier charges by the ton, density determines cost.

5. No Base Prep

Gravel dumped on bare soil without landscape fabric or a compacted base sinks and mixes with dirt over time. Prep work stretches the life of your gravel.

Accuracy and Limitations

The volume math is exact geometry. The weight conversion uses typical average densities, which may differ from your actual gravel by 10 to 20 percent depending on source, moisture and gradation.

What it calculates accurately

  • Volume in cubic feet and cubic yards for rectangles, circles and triangles
  • Waste-adjusted volume and weight
  • Bag counts based on standard bag sizes
  • Cost estimates from your entered price

What it does not account for

  • Exact density of your specific gravel source
  • Moisture content, which can add 5 to 15 percent weight
  • Subgrade irregularities and slope
  • Compaction rate for your soil type

How We Calculate Your Gravel Needs

Method
Calculate the volume for the selected shape, divide by 27 for cubic yards, apply waste percentage, then multiply by density for weight.
Inputs used
Shape, dimensions (feet), depth (inches), gravel type or custom density, waste percentage, and optional price.
Assumptions
Densities are typical industry averages (1.2 to 1.7 tons per cubic yard range). One cubic yard = 27 cubic feet. Bags are 0.5 cubic feet or 50 pounds.
Rounding
Volume and weight to two decimal places; bag counts rounded up to the nearest whole bag.
Edge cases
Depth must be greater than zero. Width is ignored for circles. Custom density must be positive.
Sources
Basic volume geometry; gravel density ranges from industry averages (labeled as typical). See Sources below.
Last reviewed
2026-10-09.

Frequently Asked Questions About Gravel Calculations

How many cubic yards of gravel do I need?

Multiply the area in square feet by the depth in feet, then divide by 27. For example, 200 square feet at 3 inches deep is 200 x 0.25 / 27 = 1.85 cubic yards. Add 5 to 10 percent for waste.

How much does a cubic yard of gravel weigh?

Typically about 1.4 tons or 2,800 pounds, depending on the type. Pea gravel and crushed stone are around 1.4 tons; decomposed granite and limestone are closer to 1.5 tons per cubic yard.

How many square feet does a cubic yard of gravel cover?

At 3 inches deep, one cubic yard covers about 108 square feet. At 2 inches deep it covers about 162 square feet, and at 4 inches deep about 81 square feet.

How many bags of gravel do I need?

Divide the total volume in cubic feet by 0.5 (for half-cubic-foot bags). For weight-based bags, divide total pounds by the bag weight. The calculator does both for you.

What is the best depth for a gravel driveway?

Most driveways need 3 to 4 inches of surface gravel on top of a compacted base layer. The total gravel thickness including the base can be 8 to 12 inches.

Is it cheaper to buy gravel in bulk or bags?

Bulk delivery is almost always cheaper per cubic yard, especially for orders over 2 to 3 cubic yards. Bags are convenient for small projects under half a cubic yard.

What gravel type is best for a driveway?

Crushed stone or #57 stone are popular for driveways because the angular pieces lock together and resist shifting. Pea gravel is smooth and tends to scatter more.

How do I convert cubic yards of gravel to tons?

Multiply cubic yards by the density in tons per cubic yard. For typical gravel at 1.4 tons per cubic yard, 2 cubic yards is 2.8 tons.

Should I add extra gravel for waste?

Yes. Adding 5 to 10 percent covers spillage, compaction and uneven ground. The calculator includes a default 5 percent waste buffer.

How accurate is a gravel calculator?

The volume calculation is exact geometry. The weight estimate uses typical densities, so actual weight may vary 10 to 20 percent. Always confirm with your gravel supplier.

Sources

Related Calculators

Planning more of your project?

Explore all construction calculators

Educational estimate. Actual gravel weight varies by type, size, moisture and source. Order 5-10% extra for settling and compaction. Confirm quantities with your supplier. Spotted an error? Let us know.

Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.