Kelvin To Rankine Converter

Quick answer

To convert kelvin to Rankine, multiply by 9/5, which is exactly 1.8: deg R = K x 1.8. No offset is needed, because both scales start at absolute zero. So 300 K is 540 deg R, 273.15 K is 491.67 deg R and 1,000 K is 1,800 deg R.

Updated 2026-09-28Reviewed by Prof. Dr. Khalil Mudassar, PhD
Try
Kelvin to Rankine
This page defaults to its own direction. Switch for the reverse conversion.
Any kelvin value from 0 up, such as 77.4 or 300. There are no negative kelvins.
Rounding for display only. The math uses the full value.
Paste several values separated by spaces, commas or new lines. Do not use thousands separators. Up to 50 are shown.

Temperature in degrees Rankine

--
Celsius--
Fahrenheit--
Step size rule--
Reverse check--
Bulk list--

Calculations run in your browser. Inputs are not sent to our servers; anything you Save stays in this browser only.

Saved results (0)

How to Use the Kelvin to Rankine Converter

  1. Enter the temperature in kelvin. Any value from 0 upward works, since 0 K is absolute zero.
  2. Choose the decimal places. Results from whole kelvin values often need only one decimal.
  3. Read the Rankine value, plus Celsius and Fahrenheit for context. Paste a column of kelvin values into the bulk box to convert them together.

Here, deg R stands for degrees Rankine, deg C for degrees Celsius and deg F for degrees Fahrenheit. The kelvin is written K with no degree sign.

ResultWhat it tells you
Temperature in degrees RankineYour kelvin value multiplied by exactly 1.8.
CelsiusThe kelvin value minus 273.15, useful for a quick sense check.
FahrenheitThe Rankine value minus 459.67, the everyday US reading.
Step size ruleOne kelvin of change equals 1.8 deg R of change.
Reverse checkThe Rankine value divided by 1.8, which must return your kelvin input.
Bulk listEach kelvin value in your list shown with its Rankine equal.
Verdict bandWhere the temperature falls against absolute zero and the fixed points of water.

What Is a Kelvin to Rankine Conversion?

A kelvin to Rankine conversion rescales an absolute temperature from SI units to US customary units by multiplying by 9/5. It is the simplest temperature conversion there is, because it is a pure ratio with no shift.

The kelvin is the SI base unit of thermodynamic temperature. NIST SP 330 defines it by fixing the Boltzmann constant at exactly 1.380 649 x 10-23 J/K. The degree Rankine is not an SI unit. It is the absolute scale built on the Fahrenheit degree, and NIST SP 811 relates the two with T/K = (T/deg R) / 1.8.

That relation says two things. Zero kelvin and zero Rankine are the same point, absolute zero. And one kelvin is 1.8 times larger than one Rankine degree, so every temperature has 1.8 times as many Rankine degrees as kelvins. Students, cryogenics technicians and aerospace engineers use this conversion when SI data has to meet a US-unit formula or table.

How Does the Kelvin to Rankine Formula Work?

The formula multiplies kelvin by 9/5, the ratio of the two degree sizes.

Formula: deg R = K x 9/5 = K x 1.8
  1. Take the kelvin value. Example: 300 K.
  2. Multiply by 1.8. Example: 300 x 1.8 = 540 deg R.
  3. Check by dividing back: 540 / 1.8 = 300 K.

There is no 273.15 and no 459.67 in this formula. Those offsets only appear when a scale with a different zero, such as Celsius or Fahrenheit, is involved. Because the ratio 9/5 is exact, a kelvin value with a finite number of decimals always gives a Rankine value with a finite number of decimals.

A quick mental method: double the kelvin value, then take away one tenth of that doubled value. For 250 K, 500 minus 50 gives 450 deg R, which is exact.

Kelvin to Rankine Worked Examples

A 300 K reference temperature. 300 x 1.8 = 540 deg R. Many textbook problems use 300 K as a round room temperature, and 540 deg R is its US-unit twin.

The ice point, 273.15 K. 273.15 x 1.8 = 491.67 deg R. This is where the 491.67 in the Celsius shortcut comes from.

The triple point of water, 273.16 K. 273.16 x 1.8 = 491.688 deg R. NIST describes the triple point cell used to calibrate thermometers at this temperature.

A sea-level standard day, 288.15 K. 288.15 x 1.8 = 518.67 deg R, which is 59 deg F.

Hot gas at 1,000 K. 1,000 x 1.8 = 1,800 deg R. Round kelvin values turn into round Rankine values, which makes combustion problems easy to cross-check.

A cold sample at 100 K. 100 x 1.8 = 180 deg R. Cryogenic data in Rankine stays small and positive, just like in kelvin.

For the opposite direction, the Rankine to kelvin converter divides by 1.8.

Factors That Change Your Rankine Result

A pure ratio leaves little room for error, but these points still matter.

Significant Figures in the Kelvin Value

Multiplying by 1.8 does not add precision. A value of 300 K known to plus or minus 0.5 K gives 540 deg R known to plus or minus 0.9 deg R.

Whether the Input Really Is Kelvin

A value such as 25 is almost certainly Celsius, not kelvin. Treating 25 deg C as 25 K would give 45 deg R instead of 536.67 deg R. The verdict band flags values far below the freezing point of water so you can double-check.

Temperature Versus Temperature Change

For kelvin and Rankine alone, the two cases use the same factor. A 10 K rise is an 18 deg R rise, and 10 K is 18 deg R. This only holds because both scales share the same zero.

ITS-90 Versus Thermodynamic Temperature

Lab thermometers report ITS-90 values, which NIST SP 330 calls close approximations to true thermodynamic temperature. The tiny difference passes through the 1.8 factor unchanged in relative size.

Kelvin vs Rankine Compared

Both are absolute scales. They differ only in degree size, symbol and where they are used.

FeatureKelvin (K)Rankine (deg R)
Zero pointAbsolute zeroAbsolute zero
Degree sizeSame as one Celsius degreeSame as one Fahrenheit degree, 5/9 K
Ice point of water273.15 K491.67 deg R
Triple point of water273.16 K491.688 deg R
StatusSI base unitNon-SI, US customary engineering unit
Symbol styleK, no degree signdeg R, with the degree sign
Typical usersScience worldwideUS thermodynamics and engineering tables

Need the Celsius view of a kelvin value first? The Celsius to kelvin converter explains that 273.15 offset.

When to Use a Kelvin to Rankine Converter

Feeding SI Data into US-unit Formulas

NASA notes that the equation of state needs an absolute temperature, and that in the Imperial system this is Rankine. A gas temperature from an SI source, such as 350 K, must become 630 deg R before it goes into a pounds-and-feet calculation.

Checking Entropy and Heat Capacity Units

US engineering data lists specific heat and entropy per degree Rankine, for example Btu per pound per deg R. NIST SP 811 gives the matching SI factors. Converting the temperature with the same 9/5 ratio keeps the whole calculation consistent.

Ratios That Must Not Change

Temperature ratios are the same on both absolute scales. A cycle between 300 K and 600 K has a Carnot limit of 50 percent, and so does the same cycle between 540 and 1,080 deg R. That is a quick test that a conversion was done right.

To express the Rankine result as an everyday reading, the Rankine to Fahrenheit converter subtracts 459.67.

Kelvin to Rankine Conversion Chart

Values from deg R = K x 1.8, exact to 3 decimals, with Celsius for reference.

Kelvin (K)Rankine (deg R)Celsius (deg C)
00-273.15
11.8-272.15
1018-263.15
5090-223.15
100180-173.15
150270-123.15
200360-73.15
250450-23.15
273.15491.670
273.16491.6880.01
288.15518.6715
293.15527.6720
30054026.85
373.15671.67100
500900226.85
10001800726.85
150027001226.85
200036001726.85
500090004726.85

Each 5 K step adds exactly 9 deg R, so every multiple of 5 K gives a whole number of Rankine degrees.

Common Kelvin to Rankine Mistakes

1. Adding 459.67

That offset converts Fahrenheit to Rankine. Adding it to kelvin gives 759.67 for 300 K instead of 540 deg R.

2. Multiplying by 5/9 Instead of 9/5

The Rankine number is always the larger one. 300 K times 5/9 gives 166.67, which is the wrong direction.

3. Rounding 1.8 or Using a Stored Fraction Badly

1.8 is exact, so there is nothing to round. Typing 1.79 or 1.81 adds a 0.6 percent error at every step.

4. Writing Degrees Kelvin

The SI unit is the kelvin, symbol K, with no degree sign. The Rankine keeps the word degree. Mixing the styles makes reports look careless and can confuse readers.

5. Entering a Celsius Value as Kelvin

A reading of 20 is likely 20 deg C. Converted as kelvin it gives 36 deg R, far colder than any room.

Accuracy and Limitations

The result is exact, because 9/5 is a defined ratio. The only rounding is the display setting you choose.

What it calculates accurately

  • Rankine from kelvin, and kelvin from Rankine in reverse mode
  • The matching Celsius and Fahrenheit values
  • The step rule for temperature changes and a reverse check
  • A list of up to 50 kelvin values at once

What it does not account for

  • Uncertainty in the thermometer or data source
  • Differences between ITS-90 values and true thermodynamic temperature
  • Which property table or code your project must follow
  • Values typed in the wrong scale, such as Celsius entered as kelvin

How We Calculate Kelvin to Rankine

Method
deg R = K x 1.8. Reverse: K = deg R / 1.8. Celsius and Fahrenheit are derived from the same kelvin value.
Inputs used
A kelvin value (or a Rankine value in reverse mode), the number of decimals and an optional list.
Standards
NIST SP 811 Appendix B.8 (degree Rankine to kelvin, T/K = (T/deg R)/1.8). NIST SP 330 section 2.3.1 (definition of the kelvin).
Rounding
Shown to your chosen 2 to 8 decimals. The math itself is never rounded.
Edge cases
Negative kelvin or Rankine values are blocked. 0 K returns 0 deg R. Values above 10 million K get a warning to check the input.
Verdict band
Compares the result with absolute zero, 491.67 deg R (273.15 K) and about 671.67 deg R (373.15 K).
Sources
NIST SP 811, NIST SP 330, the NIST Office of Weights and Measures and NASA Glenn (listed below).
Last reviewed
2026-10-01.

Frequently Asked Questions About Kelvin to Rankine

What is 300 K in Rankine?

It is 540 deg R. Multiply 300 by 1.8 and you are done, since no offset is involved.

Is 0 K the same as 0 deg R?

Yes. Both scales put zero at absolute zero, so 0 K and 0 deg R are the same temperature, equal to -273.15 deg C and -459.67 deg F.

Why is there no offset between kelvin and Rankine?

Both are absolute scales that start at the same point. Only the degree size differs, so a single multiplication converts them.

How many Rankine degrees are in one kelvin?

One kelvin equals exactly 1.8 Rankine degrees. Put the other way, one Rankine degree is 5/9 of a kelvin, about 0.5556 K.

What is the triple point of water in Rankine?

The triple point is 273.16 K, which is 491.688 deg R. The ice point at 273.15 K is 491.67 deg R, just 0.018 deg R lower.

Can I convert kelvin to Rankine in my head?

Yes. Double the kelvin value and subtract one tenth of the result. For 400 K: 800 minus 80 is 720 deg R, exact.

Do temperature ratios change between kelvin and Rankine?

No. Both scales are proportional to thermodynamic temperature, so any ratio, such as T cold divided by T hot, is identical on either scale.

Is Rankine an SI unit?

No. The kelvin is the SI unit of thermodynamic temperature. The degree Rankine is a US customary unit, and NIST SP 811 lists it with its exact factor to the kelvin.

How do I convert kelvin to Rankine in a spreadsheet?

Use =A2*1.8 with the kelvin value in A2. For a whole column, fill the formula down; the results need no rounding correction.

Does the converter keep my numbers?

No. Your numbers never leave the page. Anything you press Save on is kept in this browser only.

Sources

Related Calculators

Need another temperature scale?

Explore all temperature converters

This converter is for education and engineering practice. The 9/5 ratio is exact, so any error comes from the kelvin value you enter. For design and safety work, use the data sources and codes that apply to your project. Spotted an error? Let us know.

Author

shakeel-Muzaffar
Founder & Editor-in-Chief at  ~ Web ~ More Posts

Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.