A pressure converter changes a value between units such as pascals, bar, psi, atmospheres and millimetres of mercury. Enter a value, choose its unit and the unit to convert to. For example, 1 atmosphere is about 14.7 psi, or 101.325 kilopascals.
Calculations run in your browser. Inputs are not sent to our servers; anything you Save stays in this browser only.
Saved results (0)
How to Use the Pressure Converter
- Enter the value you want to convert.
- Choose the from unit.
- Choose the to unit.
- Read the result and the conversion rate.
Here is what each result means:
| Result | What it means |
|---|---|
| Result | The value converted to your chosen unit. |
| In pascals | The value in the SI unit, used as the bridge. |
| Conversion rate | How much one from-unit is in the to-unit. |
What Is Pressure and Its Units?
Pressure is force spread over an area, and it is measured in many units because different fields settled on different standards. Weather reports use hectopascals or millibars, tyre pressure uses psi or bar, and science uses pascals. Converting between them is a common need when a figure is quoted in a unit you are not used to.
The SI unit is the pascal, one newton per square meter. It is small, so everyday pressures are large numbers: normal atmospheric pressure is about 101,325 pascals. That is why kilopascals, bar and atmospheres, which are larger units, are often more convenient for real-world pressures.
This converter bridges every unit through the pascal. It multiplies your value by the number of pascals in its unit, then divides by the number of pascals in the target unit. Because each unit has a fixed value in pascals, the conversions are exact ratios that never change.
How Does the Pressure Converter Work?
It converts through the pascal, the SI unit of pressure.
- Your value is multiplied by its unit's value in pascals.
- That gives the pressure in pascals, the common base.
- Dividing by the target unit's value in pascals gives the result.
For the physics of pressure, see the pressure calculator and the force calculator.
Pressure Conversion Example
Convert 1 atmosphere to psi.
Result: 1 atm is 101,325 pascals, and dividing by 6,894.76 pascals per psi gives about 14.7 psi. In kilopascals the same pressure is 101.325 kPa.
Pressure Units and Their Value in Pascals
Every unit has a fixed value in pascals.
| Unit | In pascals |
|---|---|
| Pascal (Pa) | 1 |
| Kilopascal (kPa) | 1,000 |
| Millibar (mbar) | 100 |
| Bar | 100,000 |
| PSI | about 6,894.76 |
| Atmosphere (atm) | 101,325 |
| mmHg (Torr) | about 133.32 |
A bar is very close to one atmosphere, which is why weather charts in millibars are easy to read: 1013 millibars is roughly normal sea-level pressure. Psi is common for tyres and gauges, especially in the United States.
Comparing the Common Pressure Units
Different fields favour different units.
| Unit | Typical use |
|---|---|
| Pascal, kilopascal | Science and engineering |
| Bar, millibar | Weather and industry |
| PSI | Tyres and gauges |
| Atmosphere, mmHg | Chemistry and medicine |
Knowing which unit a field prefers helps you sense-check a figure. A tyre at 32 psi, a storm at 980 millibars and a lab at 1 atmosphere are all everyday pressures written in the unit each field finds most natural.
What Affects the Converted Value
The Two Units
The ratio between the from-unit and to-unit sets the result; each has a fixed value in pascals.
Absolute vs Gauge
Gauge pressure is measured above the atmosphere; absolute includes it. This converter treats the numbers as given.
Temperature for MmHg
Millimetres of mercury depend slightly on temperature; the standard value at 0 degrees Celsius is used.
When to Use a Pressure Converter
Everyday Tasks
Convert a tyre pressure from psi to bar, or a weather reading between millibars and kilopascals.
Science and Engineering
Move between pascals and other units in calculations.
Travel and Imports
Read a gauge quoted in a unit you do not normally use.
Common Mistakes
1. Confusing Bar and Atmosphere
They are close but not equal: 1 atm is 1.01325 bar, not exactly 1 bar.
2. Mixing Gauge and Absolute
A tyre gauge reads above atmospheric pressure, so gauge and absolute figures differ by about 1 atm.
3. Wrong Direction
Check which unit is the from and which is the to; swapping them inverts the result.
4. Forgetting the Scale of the Pascal
The pascal is small, so everyday pressures are tens or hundreds of thousands of pascals.
5. Treating MmHg as Exact
Millimetres of mercury vary slightly with temperature; a standard value is used here.
Accuracy and Limitations
Conversions use fixed, exact factors relative to the pascal.
What it calculates accurately
- Conversion between all seven units
- The value in pascals
- The conversion rate between units
What it does not do
- Switch between gauge and absolute pressure
- Adjust mmHg for temperature
- Handle vacuum below zero specially
- Convert to less common units
How We Convert Pressure
Frequently Asked Questions
How many psi are in 1 atmosphere?
About 14.7 psi. One atmosphere is 101,325 pascals, and dividing by 6,894.76 pascals per psi gives roughly 14.7 psi.
How do you convert bar to psi?
Multiply bar by 14.5038, since 1 bar is 100,000 pascals and 1 psi is 6,894.76 pascals. So 2 bar is about 29 psi.
What is the SI unit of pressure?
The pascal, one newton per square meter. It is small, so everyday pressures are large numbers, which is why bar and atmospheres are often used.
Is 1 bar the same as 1 atmosphere?
Almost, but not exactly. One atmosphere is 1.01325 bar, so a bar is slightly less than an atmosphere.
How do I convert kPa to psi?
Multiply kilopascals by 0.145038. For example, 100 kPa is about 14.5 psi. This converter does it for you in both directions.
What is mmHg?
Millimetres of mercury, also called torr, a unit from measuring pressure with a mercury column. One atmosphere is 760 mmHg. It is common in medicine.
What is the difference between gauge and absolute pressure?
Gauge pressure is measured above atmospheric pressure; absolute pressure includes the atmosphere. They differ by about one atmosphere. This tool treats the number as given.
Why are there so many pressure units?
Different fields adopted different standards over time. Weather uses millibars, tyres use psi, and science uses pascals, so converting between them is often needed.
Is my information saved?
No. The calculation runs in your browser and nothing you enter is stored or sent anywhere, unless you choose Save, which keeps the result only on this device.
Sources
- Pascal (unit) (Wikipedia).
- Pressure (Wikipedia).
- Bar (unit) (Wikipedia).
Related Guides
Related Calculators
Looking for more converters?
Explore all convertersThis converter changes a pressure between pascals, kilopascals, bar, millibar, psi, atmospheres and millimetres of mercury. Choose the value and its unit, then the unit to convert to. All conversions go through the pascal, the SI unit of pressure. Values assume standard conditions; mmHg is taken at 0 degrees Celsius. Spotted an error? Let us know.
Author
Shakeel Muzaffar is the Founder and Editor-in-Chief of MultiCalculators.com, bringing over 15 years of experience in digital publishing, product strategy, and online tool development. He leads the platform's editorial vision, ensuring every calculator meets strict standards for accuracy, usability, and real-world value. Shakeel personally oversees content quality, formula verification workflows, and the platform's commitment to publishing tools that are genuinely useful for students, professionals, and everyday users worldwide.




